Klipper configuration for CR-10
This model provides configuration files for Klipper and Fluidd designed for a modified CR-10 3D printer. The purpose is to serve as a starting point for users looking to implement Klipper on a semi-original CR-10 setup. 1 Practical uses include enabling high-speed printing capabilities. The author reports that the setup can achieve 2000mm/sec² acceleration and 100mm/sec printing speeds with good quality, provided the filament temperature is increased by 10°C. The author personally uses more conservative settings of 1000mm/sec² acceleration and a maximum speed of 80mm/s. Using a lighter bed instead of the original glass may allow for higher speeds. Included parts consist of configuration files for Klipper and Fluidd (provided in klipper.zip) and a CHEPCalibrationCube.stl file. Assembly and hardware context: The author's specific hardware modifications include a dual gear red extruder, a PEI bendable bed, and an all-metal hot-end clone. The system utilizes a Raspberry Pi 3B with a clean OS, installed via Kiauth. A relay is connected to pin21 of the Raspberry Pi to allow for power control (turning the CR-10 on/off). Regarding software tuning, the author notes that well-configured pressure advance may negate the need for input shaper, and omitting input shaper may reduce print time by 20% due to fewer movements.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar