Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

7 modelos etiquetados · Página 1 de 1

#first robotics

Descubre modelos 3D etiquetados como first robotics y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de FRC 3038 2025 Shallow Cage Climber 3D Printed Parts

FRC 3038 2025 Shallow Cage Climber 3D Printed Parts

These 3D printed parts are designed for FRC Team 3038's Shallow Cage Climber mechanism. Purpose The components serve as part of the Shallow Cage Climber mechanism used by FRC Team 3038. Practical Uses These parts are intended for use in the construction or maintenance of the team's specific climbing mechanism. Included Parts The model includes one unit of part number 3038-25-P-00-021 (file: 3038-25-P-07-021 v4.stl). Printing and Assembly Guidance The author reports that these parts were printed using PETG material.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRC 3038 2025 Coral Outtake 3D Printed Parts

FRC 3038 2025 Coral Outtake 3D Printed Parts

These 3D printed components are designed for FRC team 3038's Coral Outtake mechanism. Purpose The purpose of these parts is to serve as the structural components for the Coral Outtake mechanism used in FRC competition. Practical Uses These parts are intended for use in the construction of the Coral Outtake mechanism for FRC team 3038. Included Parts The model includes the following files: - 1x 3038-25-P-05-007 - 2x 3038-25-P-05-008 Printing and Assembly Guidance The author reports that all parts were printed using PETG material.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRC 3038 2025 Elevator 3D Printed Parts

FRC 3038 2025 Elevator 3D Printed Parts

This collection contains 3D printed components designed for FRC Team 3038's elevator mechanism. Purpose The purpose of these parts is to serve as the printed components for the elevator mechanism used by FRC team 3038. Included Parts The model set includes the following specific parts: - 5x 3038-25-P-08-011 - 4x 3038-25-P-08-014 - 6x 3038-25-P-08-015 - 2x 3038-25-P-08-023 - 2x 3038-25-P-98-045 - 2x 3038-25-P-98-047 - 2x 3038-25-P-98-048 Printing Guidance According to the author, part 3038-25-P-08-015 should be printed in TPU. All other parts in this collection are intended to be printed in PETG.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRC Break Beam Sensor Mount

FRC Break Beam Sensor Mount

FRC Break Beam Sensor Mount Purpose This model is designed to serve as a mount for an FRC break beam sensor. Practical Uses It is intended for use in FIRST Robotics Competition (FRC) applications to secure break beam sensors to robot components. Included Parts - 3038-25-P-98-039 v6.stl Printing and Assembly Guidance The author states that this mount is intended to be mounted using 3M VHB tape. For printing, the model can be produced using either PLA or PETG materials.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRC Mascot Helmet

FRC Mascot Helmet

FRC MASCOT HELMET Purpose This model was originally created for FRC Team 6996's Koala Mascot, which is located on the side of their robot. Practical Uses Designed to be secured via a zip tie, the model features a slot compatible with zip ties measuring 4.7mm wide and 1.2mm thick. It includes a specific internal area for the zip tie head to rest. The author advises "Safety FIRST!" Included Parts The download includes the following files: - Koala Mascot Helmet.3mf - Pre-sliced .gcode and .bgcode files for i3 Mk3, Mk4s, Core One, and XL printers using 0.4mm nozzles and eSun PLA+. Printing and Assembly Guidance The recommended print profile uses a 0.025mm layer height and 5% Grid Infill. The author recommends using variable layer height for the rim of the helmet, noting that printing time will vary depending on whether this setting is enabled. Attribution: Originally made by the author for FRC Team 6996.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRC Robot Handle

FRC Robot Handle

FRC Robot Handle Purpose This model is a handle designed for mounting to an Andymark AM14U5 KOP chassis. According to the author, a set of four handles can support a 100-pound robot, though they should be capable of handling up to 125 pounds. Practical Uses It is intended for use in FRC (FIRST Robotics Competition) applications to provide a grip point for maneuvering a robot chassis. Included Parts - Robot Handle (STL file) Printing and Assembly Guidance To print this model, use PLA material with a 15% infill density. The part should be oriented laying down on the print bed. No supports are required for printing. Assembly requires 10-32 1" long bolts for mounting to the chassis.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRC Camera Mount

FRC Camera Mount

Purpose This model is a camera mount designed for the Microsoft LifeCam HD-3000 to be used on an FRC robot. Practical Uses The mount allows the camera angle to be adjusted and then locked into a specific position. Included Parts - Camera Mount Plate.stl - Camera Mount Base.stl - Camera Mount Housing.stl Printing/Assembly Guidance The author notes that the model may need to be scaled up to provide sufficient clearance for mounting bolts.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar