Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#execute

Descubre modelos 3D etiquetados como execute y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Xpress Execute FT1S Front bumper

Xpress Execute FT1S Front bumper

Purpose: This is a work in progress design for the Xpress Execute FT1S intended to provide more side protection than the original. 1. Practical Uses: The bumper arches out to offer increased protection to the sides of the vehicle. 2. Included Parts: bumper.stl, bumper V2.stl. 3. Printing/Assembly Guidance: The author reports the model is made in TPE with 85A flex. Recommended settings include a wall line count of 5, no top or bottom layers, 40% infill, and a Tri-Hexagon or honeycomb infill pattern.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Xpress Execute FT1S Bumper, Final

Xpress Execute FT1S Bumper, Final

Xpress Execute FT1S Bumper, Final Purpose This model is a replacement bumper designed for the Xpress Execute FT1S. According to the author, this version is intended to perform better than the original bumper, specifically maintaining durability during racing and hard crashes. Practical Uses This part is intended for use in RC racing environments. The author reports that the bumper successfully withstood 7 hours of track use and hard crashes. Included Parts - Bumper_Final_version.stl Printing and Assembly Guidance The author recommends using Ninjaflex 85A material. Suggested print settings include: - Top/Bottom layers: 0 - Walls: 1 - Infill: 50% The author suggests scaling up the Z-value to 12mm, or to your desired height.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar