Meshopia · EnglishEnglish
MESHOPIA

4 modelos etiquetados

#escala 1:10

Descubre modelos 3D etiquetados como escala 1:10 y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Carcasa tubular para variador de coche RC de drift 1:10

Tubular housing for 1:10 scale RC drift car ESC

Tubular housing designed for an electronic speed controller (ESC) of a 1:10 scale drift car. The author uses PETG and clarifies that the piece shown in their photograph has been polished. They do not identify the specific ESC model nor do they provide information regarding universal compatibility, a degree of waterproofing, or a cooling function. Preparation, compatibility, and printing Compare the internal dimensions with your ESC and reserve space for connectors and cables. Also, check that the housing does not obstruct the necessary ventilation for the equipment. Polishing is a post-processing finish, not an automatic property of the print. The source does not specify layer height, infill, or orientation; prepare a fit test before installing the electronics.

Technology
Sin probar
material
PETG
Difficulty
Sin especificar
Vista de Rueda TurboFun para drift RC a escala 1:10

TurboFun Wheel for 1:10 scale RC drifting

TurboFun Wheel identified by the source for 1:10 scale drift modeling. The available documentation is limited to the design name and its usage tag; it does not confirm hex diameter, offset, width, or compatible tires. These measurements must be obtained from the file and compared with the car before printing. Preparation, compatibility and printing Maintain the original scale during the first check. Check the center hub, the axle pitch, and the clearance from the suspension arms. Sharing a 1:10 scale does not guarantee compatibility between wheels and vehicles. No material, infill, or strength testing data is available; treat the first print as a dimensional check.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Caja de herramientas de escala para plataforma de crawler RC

Scale toolbox for RC crawler platform

Miniature toolbox to decorate an RC crawler platform. The author designed it for 1:10 scale and states dimensions of 144 × 54 × 33 mm without lid and 36 mm height with lid. It is a scale accessory, not a box containing tools. Preparation, compatibility, and printing Check the lid and clearances before resizing. The source suggests scaling down to 50% for a 1:18 vehicle, but the exact geometric conversion from 1:10 to 1:18 is approximately 55.6%; the final size should be decided by the available space. Walls and fits also change when scaling. No print profile is documented; check both pieces separately.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Caja de carga para Redcat Everest Gen7 a escala 1:10

Cargo box for Redcat Everest Gen7 1:10 scale

Cargo box designed for the Redcat Everest Gen7 crawler at 1:10 scale. The author mentions additional variants with greater flexibility intended for a custom suspension assembly. It should not be assumed that all variants correspond to the stock vehicle or that they can be combined indiscriminately. Preparation, compatibility, and printing Check the file names and shapes to choose the appropriate variant before slicing. Verify anchor points, track width, and suspension articulation with your configuration. The source does not provide material, layer, or infill settings. A partial print of the mounting area can be used to check the fit before manufacturing the complete box, without modifying the original download files.

Technology
Sin probar
material
—
Difficulty
Sin especificar