HerramientasFree
CR Touch adapter for Sprite Extruder 2.0
CR touch adapter for sprit extruder 2.0 Purpose This model is a revised version of a previous design intended to fix the Z offset by -3mm to compensate for the sensor placement. Practical Uses It is designed to serve as an adapter for a CR Touch sensor when used with a Sprite Extruder 2.0. Included Parts The model includes the CR touch - V2.stl file. This model requires additional hardware: two M3 bolts and two M3 nuts. Printing and Assembly Guidance Recommended print settings are a speed of 30mm/s, a 0.12mm layer height, 50% infill, and 3 to 5 walls. The author notes that while they printed in PLA, using ABS or ASA would increase strength. If tolerances are not sufficient, it is suggested to print at 105% scale.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar