3 tagged models · Page 1 of 1

#display

Discover 3D models tagged display and check their print information, files and terms before downloading.Search this tag in the catalogue →

ElectrónicaFree

Holder for HW-140 DC-DC Volt LCD Display

Holder for HW-140 DC-DC Volt LCD Display Purpose This model is designed to provide a permanent mounting solution for a HW-140 DC-DC Volt LCD Display. It was specifically developed to monitor the battery voltage of a 160 GS (y1963) scooter without interfering with normal vehicle operation. Practical Uses It can be used to install a voltmeter under the seat of a vintage Vespa scooter or other mobile devices to monitor electrical levels. The setup includes a push switch to allow the user to activate the measurement on demand. Included Parts The assembly consists of two main components: - A case for the voltmeter that clips into a second mounting part. - A mounting part designed to be attached to the scooter using the two original nuts used to fix the fuel tank. Printing and Assembly Guidance The model is provided in two files: Holder_HW140DCDC_3a.stl and Case_HW140DCDC_3a.stl. Regarding printing, the author states that the top part of the case should be printed with support everywhere. No specific printing instructions are provided for the lower part.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Moda y accesorios€9.90

MESHOPIA NOVA — Sci-Fi Lightsaber Prop | 12 STL Components

MESHOPIA NOVA is a sci-fi cosplay and display prop supplied as 12 STL component files in one ZIP. The set groups five numbered extension modules, a shaft set and separate grip and endpiece components. The numbered naming scheme identifies modules A–E, the shaft set, rear pieces, accent pieces and trim pieces. Accent and trim labels identify the originally gold and silver component groups; the files contain geometry only and the maker chooses materials or finishing colours. These are parts and variants of one project, not 12 complete swords. Lighting, assembly fit and print performance have not been verified. No verified printer settings or test-print results were supplied in the source. Keep related components at a consistent scale and inspect dimensions and orientation in your slicer. Intended for cosplay and decorative display. Digital files only; no physical prop or electronics are included. Source: https://cults3d.com/en/3d-model/fashion/meshopia-nova-sci-fi-lightsaber-prop-12-stl-components-tpiernas

Technology: Sin probar
material: —
Difficulty: Sin especificar

Moda y accesorios€9.90

MESHOPIA NOVA — Sci-Fi Lightsaber Prop | 12 STL Components

Create a sci-fi lightsaber prop for cosplay or decorative display with this 12-file MESHOPIA NOVA set. The pack groups five numbered extension modules, a shaft set, rear pieces, accent parts and trim components. These are components and variants, not 12 complete swords. Each STL contains geometry only; choose colours through your filament, materials or finishing. **Digital files only:** no physical prop, electronics or lighting parts are included. Inspect dimensions and mating parts in your slicer before printing. Assembly fit, lighting, print performance and physical use have not been verified. No tested settings or verified print results are supplied. The design is intended as a cosplay and decorative display prop; use suitable materials and follow applicable event rules.

Technology: Sin probar
material: —
Difficulty: Sin especificar