DeepCool AN600 adapter for AMD BC-250
DeepCool AN600 Adapter for AMD BC-250 Purpose This 3D-printable mounting solution is designed to facilitate the installation of a DeepCool AN600 cooler onto the AMD BC-250 motherboard. Practical Uses This adapter allows users to repurpose or utilize the DeepCool AN600 low-profile cooler specifically with the AMD BC-250 hardware platform. Included Parts This model requires the Intel mounting brackets that are included with the DeepCool AN600 kit. The following hardware is necessary for installation: - 4x M3 x 12mm bolts - 4x M3 x 20mm bolts - 8x M3 nuts Printing and Assembly Guidance To prevent warping or sagging under thermal load, it is recommended to use high-temperature, stiff filaments such as ASA, ABS, or Carbon Fiber/Glass Fiber reinforced PETG (CF-PETG / GF-PETG). Suggested print settings include: - Walls: 4 - Top/Bottom Layers: 6 - Infill: 30% Cubic High wall counts and a cubic infill pattern are suggested to ensure the structural rigidity required for consistent mounting pressure.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar