DeepCool AN600 adapter for AMD BC-250
3D model: Custom mounting adapter to fit a DeepCool AN600 low-profile cooler onto the AMD BC-250 motherboard. Installation Hardware: - Bracket Requirement: This adapter is designed to be used specifically with the Intel mounting brackets included with the DeepCool AN600 kit. - 4x M3 x 12mm bolts - 4x M3 x 20mm bolts - 8x M3 nuts Recommended Materials: The author recommends using high-temperature, stiff filaments to prevent warping or sagging under thermal load, listing ASA, ABS, or Carbon Fiber/Glass Fiber reinforced PETG (CF-PETG / GF-PETG) as best options. Suggested Print Settings: - Walls: 4 - Top/Bottom Layers: 6 - Infill: 30% Cubic Note: The author states that high wall counts and the cubic infill pattern ensure the structural rigidity needed for consistent mounting pressure.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar