Creality CR Falcon Laser Engraver Cutter 25mm Modular Riser
Creality CR Falcon Laser Engraver Cutter 25mm Modular Riser Purpose This modular riser is designed to increase the height of the Creality CR Falcon laser engraver/cutter. Each unit provides a 25mm height increase, and the parts are designed to be stackable to achieve higher elevations. Practical Uses These risers allow users to raise the machine without requiring hardware or modifications to the original device. They fit directly over the machine's existing rubber feet and are designed to fit together securely to maintain stability. Included Parts - Creality CR Falcon Riser v1.0.stl - Creality CR Falcon 25mm Riser_v1.0.3mf Printing and Assembly Guidance The author reports successful printing using PLA with 15% infill on a K1C printer. To ensure tight tolerance mating surfaces are not compromised by support structures, it is suggested to print the part on its non-mating edge. The author recommends using a glue stick and suggests adding a brim to the supplied file to improve print success. For installation, simply slip the part over the machine's rubber feet; additional units can be added to the stack to increase height further.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar