MESHOPIAModelismo y radiocontrol3 modelos etiquetados · Página 1 de 1
Purpose This adapter is designed for the CR-30 Print mill to substitute the small fan located inside the hot end. Practical Uses The part is intended to accommodate a 40x40x10 mm fan. Included Parts - cr-30 fan shroud.stl Assembly Guidance The author reports securing the unit into the metal housing using short machine screws.
Purpose: This single wall box test cube is designed to calibrate the flow rate for the CR-30 print mill or other print mills. 1. Practical Uses: The cube is used to determine an ideal flow rate by measuring the thickness of a single printed wall with calipers. To calculate the new flow rate, divide the nozzle width by the measured thickness and multiply the result by the current flow rate. Printing Guidance: Use the layer height you are targeting. Set the shell count to 1, top layers to 0, and infill to 0. This ensures the cube prints with a single outer layer for measurement. Included Files: - 45deg single_wall_box rotated.stl
This model is designed to challenge the printing capabilities of a Cr-30 Print Mill. Practical uses include testing the performance and limits of the printer. Included files: - Cr-30_PrintMill_Test_.stl Printing guidance: The author instructs to print this model without supports.