3 tagged models · Page 1 of 1

#calibration

Discover 3D models tagged calibration and check their print information, files and terms before downloading.Search this tag in the catalogue →

Vista de Matriz de calibración de primera capa por zonas

HerramientasFree

First layer calibration matrix by zones

Low-thickness technical part designed to quickly and comparably check how the first layer is deposited in different areas of the print bed. The matrix allows for observing variations in squish, line continuity, and adhesion without consuming much material, making it useful after leveling the bed, adjusting the Z offset, changing the print surface, or modifying the slicer profile. Each sample must be interpreted as a visual reference: separated lines usually indicate excessive height; a very squashed, rough, or translucent surface may indicate a nozzle that is too close. The model does not automatically correct mechanical problems, dirt, bed deformation, or poorly calibrated flow.

Technology: FDM
material: PLA, PETG
Difficulty: Intermedia

RC & MecánicaFree

RC car GECKO test part

RC car GECKO test part Purpose This component serves as a calibration and test part for the GECKO 1:10 scale expedition RC crawler. It is designed to verify if a printer is properly set up to handle the complexity of the full GECKO model. Specifically, it allows users to test their ability to remove supports and achieve precise tolerances before committing to the complete build. Practical Uses Users can utilize this part to assess their printing experience and ensure their machine can produce the detailed components required for the full car. A primary use is testing bearing fitment; the part is designed to verify if a 10x15x4mm bearing can be inserted so that it fits securely without being loose. Included Parts - Mask v12.stl - Bearing test.stl Printing and Assembly Guidance It is suggested to print this part to determine if you can easily remove supports from the model. For assembly testing, attempt to insert a 10x15x4mm bearing into the printed part. According to the author, the bearing must fit while remaining snug and not loose. Detailed user guides are available in English and Czech via the provided documentation links.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

CR-30 Printmill single wall box flow rate test cube 45 degree

Purpose: This single wall box test cube is designed to calibrate the flow rate for the CR-30 print mill or other print mills. 1. Practical Uses: The cube is used to determine an ideal flow rate by measuring the thickness of a single printed wall with calipers. To calculate the new flow rate, divide the nozzle width by the measured thickness and multiply the result by the current flow rate. Printing Guidance: Use the layer height you are targeting. Set the shell count to 1, top layers to 0, and infill to 0. This ensures the cube prints with a single outer layer for measurement. Included Files: - 45deg single_wall_box rotated.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar