Carbon Hornet II
This model is a remake of the Carbon Hornet II, a 5" drone originally designed and produced by S.Creamer in 2016. This version has been remodeled to be easily printable while preserving the original design. **Purpose and Practical Uses** The frame is intended for use with 2207 motors. It features mounting holes compatible with 30x30, 25x25, and 20x20 flight controllers. The video mount is currently designed for Caddx cameras with a 6mm screw mounting distance. While no specific location is designated for antennas or radio receivers, the author notes there is ample space available inside the frame. The battery can be secured under the length of the rear arm using a 20mm wide strap via provided slots, or alternatively secured to the top of the frame using two straps. **Included Parts** - Carbon_Hornet_Frame.stl - Carbon_Hornet_Bras_arrière.stl - Carbon_Hornet_Bras_avant.stl - Carbon_Hornet_Support_Vidéo_Walksnail.stl - Carbon_Hornet_II_V1.step **Printing and Assembly Guidance** The author recommends printing the frame and arms using a strong material such as PA12-CF, PA6-CF, or PETG-CF. For optimal strength, use 5 perimeter walls and at least 50% infill (100% is ideal). Required hardware includes: - 2x M3 x 19 standoffs - 6x M3 nuts - 6x M3 x 12 screws - 2x M3 x 6 screws
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar