17 tagged models · Page 1 of 1

#assembled display

Discover 3D models tagged assembled display and check their print information, files and terms before downloading.Search this tag in the catalogue →

Vehículos y transporteFree

Ferrari LaFerrari — Detailed Vehicle Model and Assembled OBJ

Ferrari LaFerrari digital vehicle model with a sculpted low body, swept headlight recesses, large front openings, side air intakes, curved cabin, mirrors, detailed wheels and rear bodywork. PACKAGE CONTENTS The ZIP contains the source FBX, MAX and OBJ files with English filenames and an English file guide. Original native binary files are preserved. The original OBJ retains its numerical geometry; unavailable external material references may be removed. A separate assembled-display OBJ is provided for the web viewer. No external texture images were supplied. ASSEMBLED DISPLAY The original scene contains alternate body parts and detached pieces. We inspected the source MAX geometry in Blender and isolated its main closed vehicle assembly for the separate display OBJ: 2,736 mesh components, with source world transforms baked. Alternate pieces are excluded from the derived display only and remain available in the complete source files. This derived display does not preserve native hierarchy, shaders or animation. USE AND VERIFICATION Suitable for rendering, digital vehicle scenes and further model preparation. Original-application compatibility, physical dimensions, mesh watertightness and fabrication suitability remain unverified. Check topology, thin surfaces, scale and component fit before any fabrication. No tested print profile, working RC build or physical product is claimed. ORIGINAL MESHOPIA COVER It illustrates a proposed presentation finish. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks. Display axes have been reoriented for upright inspection; original source downloads retain their native orientation.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

F-14 Tomcat Kit Card — Model Kit & Assembled Display

OVERVIEW F-14 Tomcat Kit Card — Model Kit & Assembled Display is supplied as a digital display and model-making project. The illustrated arrangement is a presentation of the represented design, not proof that a physical miniature has been printed, assembled or tested. Check the actual geometry and inventory before planning a build. No additional mechanical operation, working propulsion or flight capability is promised. DOWNLOAD CONTENTS The ZIP preserves all 11 supplied STL variants, the OBJ viewing copy and the complete multicolour 3MF slicer project. It also includes an exploded assembly-reference image, this English guide, a file inventory and the locally generated assembled-display image. The 3MF retains its component graph, transforms, colour assignments, printer and filament settings, and four functional plate images. Its optional display photographs are replaced by the current finished illustration; the technical exploded view remains available both inside the project and as a separate PNG. Repeated identical resources are stored once. All filenames use neutral identifiers; the inventory lists current files, sizes and integrity hashes. GEOMETRY AND ASSEMBLY Mesh coordinates, connectivity and build transforms are preserved. STL triangle records and colour information are retained; OBJ vertices, faces, normals, texture coordinates, smoothing declarations and vertex colour numbers are preserved where present. The supplied project declares a Bambu Lab X1 Carbon with a 0.4 mm nozzle, four PLA colour slots (grey, white, yellow and black), 0.16 mm layers, two wall loops and 10% sparse infill. These are retained source settings, not agent-tested recommendations. Check compatibility or re-slice for your own printer. No machine commands were run. The presentation does not certify watertightness, wall thickness, independent printability, part fit or articulation. Review each variant before combining parts. PRINTING ADVICE — UNTESTED Confirm slicer units, intended dimensions, minimum wall thickness and build volume. Inspect open edges, intersecting surfaces, thin details and disconnected components. Repair or thicken a working copy where necessary. Orient delicate projections to reduce damage during support removal and place supports where they can be reached. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are conditional starting ranges, not tested presets. Print a representative fragile section before committing to the complete project. Electronics, motors, fasteners, adhesives and other hardware are not implied by a render. SCALE AND DIMENSIONS No physical scale is certified solely from the file name or image. Measure a known dimension after confirming units. For uniform resizing, divide target length by current measured length and multiply by 100. If a native 1:N scale is independently established and the desired scale is 1:T, use N divided by T multiplied by 100. Recheck thicknesses, clearances and support access after resizing. FINISHING AND PRESENTATION Test primer on a sample, remove support marks gently and mask the established paint boundaries. Handle small projections carefully. Colours in the existing finished-display illustration are a proposed miniature finish, not a guarantee of a particular real-world specification. The pictured base or surroundings are illustrative unless separately listed as downloadable geometry. Native STL files do not inherently carry a complete surface paint system. IMAGE AND RIGHTS The current public presentation image shows the finished kit-card aircraft assembled on its stand. The flat kit-card and separated components remain construction resources rather than the cover. It is an AI-assisted illustration rather than evidence of a tested physical print. The uploader has explicitly authorized free redistribution under CC0. The publishing account does not claim original design authorship. #ScaleModel #ModelMaking #Miniature #3DPrinting #STL #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

JP-01 Business Jet — Model Kit & Assembled Display

OVERVIEW JP-01 Business Jet — Model Kit & Assembled Display is supplied as a digital display and model-making project. The illustrated arrangement is a presentation of the represented design, not proof that a physical miniature has been printed, assembled or tested. Check the actual geometry and inventory before planning a build. No additional mechanical operation, working propulsion or flight capability is promised. DOWNLOAD CONTENTS The package preserves every attached portable geometry variant and the supplied STL geometry found in the retained packages. Repeated identical resources are stored once inside each complete ZIP. Geometry filenames are neutral identifiers. The file manifest lists the current downloadable geometry, sizes and integrity hashes. Earlier preparation records and reference photographs are replaced in the public package by this English guide and the existing completed-display image. No original-name correspondence is included. GEOMETRY AND ASSEMBLY Only non-geometric labels and optional header text are changed in the geometry files. STL triangle records and colour information are retained; OBJ vertices, faces, normals, texture coordinates, smoothing declarations and vertex colour numbers are preserved where present. The inspected presentation does not certify watertightness, wall thickness, independent printability, part fit or articulation. Separate variants can represent different inspection or display arrangements; review each file before combining parts. PRINTING ADVICE — UNTESTED Confirm slicer units, intended dimensions, minimum wall thickness and build volume. Inspect open edges, intersecting surfaces, thin details and disconnected components. Repair or thicken a working copy where necessary. Orient delicate projections to reduce damage during support removal and place supports where they can be reached. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are conditional starting ranges, not tested presets. Print a representative fragile section before committing to the complete project. Electronics, motors, fasteners, adhesives and other hardware are not implied by a render. SCALE AND DIMENSIONS No physical scale is certified solely from the file name or image. Measure a known dimension after confirming units. For uniform resizing, divide target length by current measured length and multiply by 100. If a native 1:N scale is independently established and the desired scale is 1:T, use N divided by T multiplied by 100. Recheck thicknesses, clearances and support access after resizing. FINISHING AND PRESENTATION Test primer on a sample, remove support marks gently and mask the established paint boundaries. Handle small projections carefully. Colours in the existing finished-display illustration are a proposed miniature finish, not a guarantee of a particular real-world specification. The pictured base or surroundings are illustrative unless separately listed as downloadable geometry. Native STL files do not inherently carry a complete surface paint system. IMAGE AND RIGHTS The current public presentation image is retained. It is an AI-assisted illustration rather than evidence of a tested physical print. The uploader has explicitly authorized free redistribution under CC0. The publishing account does not claim original design authorship. Geometry and appearance remain recognizable; renamed files do not guarantee anonymity. #ScaleModel #ModelMaking #Miniature #3DPrinting #STL #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Airbus A320 — Model Kit & Assembled Display

OVERVIEW Airbus A320 — Model Kit & Assembled Display is supplied as a digital display and model-making project. The illustrated arrangement is a presentation of the represented design, not proof that a physical miniature has been printed, assembled or tested. Check the actual geometry and inventory before planning a build. No additional mechanical operation, working propulsion or flight capability is promised. DOWNLOAD CONTENTS The package preserves every attached portable geometry variant and the supplied STL geometry found in the retained packages. Repeated identical resources are stored once inside each complete ZIP. Geometry filenames are neutral identifiers. The file manifest lists the current downloadable geometry, sizes and integrity hashes. Earlier preparation records and reference photographs are replaced in the public package by this English guide and the existing completed-display image. No original-name correspondence is included. GEOMETRY AND ASSEMBLY Only non-geometric labels and optional header text are changed in the geometry files. STL triangle records and colour information are retained; OBJ vertices, faces, normals, texture coordinates, smoothing declarations and vertex colour numbers are preserved where present. The inspected presentation does not certify watertightness, wall thickness, independent printability, part fit or articulation. Separate variants can represent different inspection or display arrangements; review each file before combining parts. PRINTING ADVICE — UNTESTED Confirm slicer units, intended dimensions, minimum wall thickness and build volume. Inspect open edges, intersecting surfaces, thin details and disconnected components. Repair or thicken a working copy where necessary. Orient delicate projections to reduce damage during support removal and place supports where they can be reached. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are conditional starting ranges, not tested presets. Print a representative fragile section before committing to the complete project. Electronics, motors, fasteners, adhesives and other hardware are not implied by a render. SCALE AND DIMENSIONS No physical scale is certified solely from the file name or image. Measure a known dimension after confirming units. For uniform resizing, divide target length by current measured length and multiply by 100. If a native 1:N scale is independently established and the desired scale is 1:T, use N divided by T multiplied by 100. Recheck thicknesses, clearances and support access after resizing. FINISHING AND PRESENTATION Test primer on a sample, remove support marks gently and mask the established paint boundaries. Handle small projections carefully. Colours in the existing finished-display illustration are a proposed miniature finish, not a guarantee of a particular real-world specification. The pictured base or surroundings are illustrative unless separately listed as downloadable geometry. Native STL files do not inherently carry a complete surface paint system. IMAGE AND RIGHTS The current public presentation image is retained. It is an AI-assisted illustration rather than evidence of a tested physical print. The uploader has explicitly authorized free redistribution under CC0. The publishing account does not claim original design authorship. Geometry and appearance remain recognizable; renamed files do not guarantee anonymity. #ScaleModel #ModelMaking #Miniature #3DPrinting #STL #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Black Jet X — Assembled Aircraft Display & Source Kit

OVERVIEW Black Jet X — Assembled Aircraft Display & Source Kit is supplied as a digital display and model-making project. The illustrated arrangement is a presentation of the represented design, not proof that a physical miniature has been printed, assembled or tested. Check the actual geometry and inventory before planning a build. No additional mechanical operation, working propulsion or flight capability is promised. DOWNLOAD CONTENTS The package preserves every attached portable geometry variant and the supplied STL geometry found in the retained packages. Repeated identical resources are stored once inside each complete ZIP. Geometry filenames are neutral identifiers. The file manifest lists the current downloadable geometry, sizes and integrity hashes. Earlier preparation records and reference photographs are replaced in the public package by this English guide and the existing completed-display image. No original-name correspondence is included. GEOMETRY AND ASSEMBLY Only non-geometric labels and optional header text are changed in the geometry files. STL triangle records and colour information are retained; OBJ vertices, faces, normals, texture coordinates, smoothing declarations and vertex colour numbers are preserved where present. The inspected presentation does not certify watertightness, wall thickness, independent printability, part fit or articulation. Separate variants can represent different inspection or display arrangements; review each file before combining parts. PRINTING ADVICE — UNTESTED Confirm slicer units, intended dimensions, minimum wall thickness and build volume. Inspect open edges, intersecting surfaces, thin details and disconnected components. Repair or thicken a working copy where necessary. Orient delicate projections to reduce damage during support removal and place supports where they can be reached. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are conditional starting ranges, not tested presets. Print a representative fragile section before committing to the complete project. Electronics, motors, fasteners, adhesives and other hardware are not implied by a render. SCALE AND DIMENSIONS No physical scale is certified solely from the file name or image. Measure a known dimension after confirming units. For uniform resizing, divide target length by current measured length and multiply by 100. If a native 1:N scale is independently established and the desired scale is 1:T, use N divided by T multiplied by 100. Recheck thicknesses, clearances and support access after resizing. FINISHING AND PRESENTATION Test primer on a sample, remove support marks gently and mask the established paint boundaries. Handle small projections carefully. Colours in the existing finished-display illustration are a proposed miniature finish, not a guarantee of a particular real-world specification. The pictured base or surroundings are illustrative unless separately listed as downloadable geometry. Native STL files do not inherently carry a complete surface paint system. IMAGE AND RIGHTS The current public presentation image is retained. It is an AI-assisted illustration rather than evidence of a tested physical print. The uploader has explicitly authorized free redistribution under CC0. The publishing account does not claim original design authorship. Geometry and appearance remain recognizable; renamed files do not guarantee anonymity. #ScaleModel #ModelMaking #Miniature #3DPrinting #STL #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Red Fin Widebody Airliner - Full Kit and Assembled Display

OVERVIEW This widebody passenger-aircraft kit includes a complete assembled display and the retained printable source parts. The presentation has a white fuselage, light-grey wings, a red fin, dark tyres and fan surfaces, and dark cockpit openings produced by painting the existing internal backing. The finish is illustrative, not a measured historical livery. No new glazing, aircraft surface or landing-gear shape was invented for the image. SOURCE ASSEMBLY The display uses 35 existing STL part slots in their shared source coordinates. Paired components use mirrored instances of the supplied geometry. The twelve main wheels follow the three axle rows measured in the supplied gear. Together these make 64 instances, with 3,692,092 source triangles in the full-resolution assembled OBJ. A rigid axis conversion and shared viewing scale do not remodel the parts. All 36 original STL slots remain in the archive: the alternative fuselage cap is retained separately rather than superimposed on the display. DOWNLOAD CONTENTS The complete ZIP includes all 36 source STL files, a full-resolution assembled OBJ with its MTL appearance file, a lighter assembled OBJ for browsing, the earlier parts-view OBJ as an alternative, and a neutral-name assembly inventory. Two editable native vector decal documents and two PDF decal sheets are retained, together with the source electronics schematic, Arduino sketch, source-reference video, English guide, checksum inventory, CC0 information and current illustration. Existing artwork credits remain visible. The publishing account does not claim original design authorship. VIEWING AND NATIVE DOCUMENTS The public OBJ is an optimized 253,782-triangle assembled viewing copy, not the full-resolution printing source. Its plain technical material can differ from the painted cover. Use the full-resolution assembly or individual STL parts when preparing a build, after inspecting their suitability. The native vector documents were independently reopened; their artwork, fonts, embedded resources and page layouts were preserved. Native editing still requires a compatible application. SCALE AND VARIANTS Decal artwork contains source-labelled 1:100 and 1:200 layouts. One alternative cap carries a source 1:120 label; that does not establish a complete second aircraft at that scale. The publishing account has not physically verified the geometry units or a printed scale. The full assembly retains source-coordinate magnitude after axis conversion; the small public viewing copy is normalized for display. Confirm a known dimension, calculate a uniform resize factor and recheck another dimension, thin features and clearances before printing or applying decals. PRINT PREPARATION — UNTESTED Inspect units, build volume, mesh condition, wall thickness, overlaps and source mating surfaces. Check the nine fuselage sections, wing joins, fine mechanisms, fin and elevator edges, landing struts, wheel holes and fan blades. A convincing illustration or responsive viewer does not prove watertightness, fit, strength or one-piece printability. Work on copies when repairing, thickening, hollowing or separating parts. The source-coordinate assembly shows a proposed pose, not a physically validated assembly manual. CONDITIONAL PRINTING AND FINISHING Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are possible starting ranges only if the measured details and equipment support them. No tested temperature, exposure, speed, infill, support placement or joining tolerance is supplied. Protect exterior surfaces and delicate edges, test a representative joint and fragile detail first, and follow printer and material guidance for drainage, curing and support removal. Test primer and decal handling on samples; apply thin paint coats and allow clearances for paint and adhesive. OPTIONAL ELECTRONICS AND SOURCE MEDIA The source sketch and schematic describe optional lighting; the sketch retains its Adafruit_NeoPixel dependency and requires an appropriate ESP32 environment. It has not been compiled, flashed or tested for this listing. Electronics, fasteners, wiring and tools are not supplied hardware. The source-reference clip shows earlier modelling and finished examples; it is not a verified print or electronics test by this publishing account. Source reference photographs are replaced by the new illustration. IMAGE AND RIGHTS Local ComfyUI/Qwen on this PC creates only the workshop surroundings. The actual assembled source render and wheel-contacting display plinth remain protected in the final composite. Public filenames and dependencies use neutral identifiers; geometry, artwork, legitimate credits or technical content may still identify a design. Originals remain unchanged. CC0 redistribution follows the uploader’s express authorization. #Airliner #PassengerAircraft #ScaleModel #ModelKit #ModelMaking #3DPrinting #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

KAC500S — RC Aircraft Kit & Assembled Display

OVERVIEW KAC500S is supplied as a digital model kit. The replacement cover shows the aircraft assembled and finished, using a reference image included in the source collection. It replaces the earlier scattered-parts cover. The supplied model silhouette, existing component arrangement and paint boundaries are retained in the reference-based illustration. The downloadable kit still consists of its supplied source resources; a cover image is not a proof of a tested physical build, complete bill of materials, printable assembly or flight capability. ASSEMBLED DISPLAY AND FINISH Retain the complete original white twin-engine aircraft with dark windows and all original wing, tail and gear shapes. Improve subtle glossy paint and dark rubber tyre finishes only. The cover is produced on this PC with local ComfyUI/Qwen Image Edit from the supplied finished-assembly reference. It is identified as an AI-assisted visualization. This correction does not claim that the agent has recovered a complete assembled 3D scene or verified each printable joint. The retained geometry, reference photographs and any included documentation should be consulted together when planning construction. Paint, glazing, mechanical hardware, supports and setting visible in a reference may require additional materials and are not automatically printable parts. DOWNLOAD CONTENTS The existing downloadable files and their names are retained unchanged by this presentation correction. This includes the earlier package and source geometry already listed on the page. The original source collection was not modified. Consult the file list and package manifest for actual formats, individual parts, alternatives, reference images and documents. Duplicate, mirrored or alternative resources do not establish how many pieces a particular build requires. Any older scattered-cover description in a retained guide is superseded by this current presentation note; fabrication checks must use the actual selected geometry and supplied construction documentation. PRINTING ADVICE — UNTESTED Inspect every selected source part in a slicer before fabrication. Check physical units, open boundaries, intersecting or disconnected shells, minimum wall thickness, thin trailing edges, small fittings and support access. Select the intended left/right parts and compatible versions carefully. Large aircraft may require separate wing and fuselage sections, reinforcement and nonprinted components. These requirements must be established from the source documentation and your intended construction method, not inferred from the cover. Choose material, extrusion or exposure, layer height and supports for your own printer and actual dimensions. Print a representative thin feature and joint sample before committing to a full build. Work on copies if mesh repair, hollowing, splitting or scaling is required. No agent-tested printer preset, structural strength, fit tolerance, electronics configuration or safe flight setup is supplied. DIMENSIONS AND SCALE No physical units or specific scale are certified by this correction. A display-layout bounding box is not an assembled measurement. Confirm source dimensions and any documented scale independently in the slicer. Use target dimension divided by current dimension multiplied by 100 to calculate a resize percentage. For a documented original 1:N and target 1:T scale, use N divided by T multiplied by 100. Recheck build volume, minimum feature thickness, joints, reinforcement and clearances after resizing. A small display miniature and an operating RC aircraft have different structural requirements. FINISHING AND PRESENTATION Remove supports without damaging fragile edges, then prepare a test sample for primer and paint. Preserve modeled surface detail while sanding. Use appropriate body, rubber, metal, canopy and fabric finishes where those surfaces are present in the selected model. The finished scene illustrates a possible appearance; surrounding supports, ground and scenery are not additional download promises. The actual resource inventory remains authoritative. IMAGE AND RIGHTS The reference is an image supplied with this source collection, not a new photograph of a physical model made by the agent. Local AI enhancement is limited to presentation and is visually compared with that reference before publication. There is no claim of a geometry-derived or physically tested assembly from this cover. CC0 follows the uploader's explicit rights and redistribution authorization. Original authorship is retained as declared on the existing page; no manufacturer endorsement is claimed. #ScaleModel #AircraftModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Beechcraft King Air 350 — Model Kit & Assembled Display

OVERVIEW Beechcraft King Air 350 — Model Kit & Assembled Display is supplied as a digital display and model-making project. The illustrated arrangement is a presentation of the represented design, not proof that a physical miniature has been printed, assembled or tested. Check the actual geometry and inventory before planning a build. No additional mechanical operation, working propulsion or flight capability is promised. DOWNLOAD CONTENTS The package preserves every attached portable geometry variant and the supplied STL geometry found in the retained packages. Repeated identical resources are stored once inside each complete ZIP. Geometry filenames are neutral identifiers. The file manifest lists the current downloadable geometry, sizes and integrity hashes. Earlier preparation records and reference photographs are replaced in the public package by this English guide and the existing completed-display image. No original-name correspondence is included. GEOMETRY AND ASSEMBLY Mesh coordinates, connectivity and build transforms are preserved. STL triangle records and colour information are retained; OBJ vertices, faces, normals, texture coordinates, smoothing declarations and vertex colour numbers are preserved where present. In supported slicer projects, selected operating settings and functional plate images are retained; optional source photographs are replaced by the current display illustration. Those settings have not been tested on a printer. The presentation does not certify watertightness, wall thickness, independent printability, part fit or articulation. Review each variant before combining parts. PRINTING ADVICE — UNTESTED Confirm slicer units, intended dimensions, minimum wall thickness and build volume. Inspect open edges, intersecting surfaces, thin details and disconnected components. Repair or thicken a working copy where necessary. Orient delicate projections to reduce damage during support removal and place supports where they can be reached. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are conditional starting ranges, not tested presets. Print a representative fragile section before committing to the complete project. Electronics, motors, fasteners, adhesives and other hardware are not implied by a render. SCALE AND DIMENSIONS No physical scale is certified solely from the file name or image. Measure a known dimension after confirming units. For uniform resizing, divide target length by current measured length and multiply by 100. If a native 1:N scale is independently established and the desired scale is 1:T, use N divided by T multiplied by 100. Recheck thicknesses, clearances and support access after resizing. FINISHING AND PRESENTATION Test primer on a sample, remove support marks gently and mask the established paint boundaries. Handle small projections carefully. Colours in the existing finished-display illustration are a proposed miniature finish, not a guarantee of a particular real-world specification. The pictured base or surroundings are illustrative unless separately listed as downloadable geometry. Native STL files do not inherently carry a complete surface paint system. IMAGE AND RIGHTS The current public presentation image is retained. It is an AI-assisted illustration rather than evidence of a tested physical print. The uploader has explicitly authorized free redistribution under CC0. The publishing account does not claim original design authorship. #ScaleModel #ModelMaking #Miniature #3DPrinting #STL #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

ASK 14 v1.9 — Model Kit & Finished Display

OVERVIEW ASK 14 v1.9 — Model Kit & Finished Display is supplied as a digital display and model-making project. The illustrated arrangement is a presentation of the represented design, not proof that a physical miniature has been printed, assembled or tested. Check the actual geometry and inventory before planning a build. No additional mechanical operation, working propulsion or flight capability is promised. DOWNLOAD CONTENTS The package preserves every attached portable geometry variant and the supplied STL geometry found in the retained packages. Repeated identical resources are stored once inside each complete ZIP. Geometry filenames are neutral identifiers. The file manifest lists the current downloadable geometry, sizes and integrity hashes. Earlier preparation records and reference photographs are replaced in the public package by this English guide and the existing completed-display image. No original-name correspondence is included. GEOMETRY AND ASSEMBLY Only non-geometric labels and optional header text are changed in the geometry files. STL triangle records and colour information are retained; OBJ vertices, faces, normals, texture coordinates, smoothing declarations and vertex colour numbers are preserved where present. The inspected presentation does not certify watertightness, wall thickness, independent printability, part fit or articulation. Separate variants can represent different inspection or display arrangements; review each file before combining parts. PRINTING ADVICE — UNTESTED Confirm slicer units, intended dimensions, minimum wall thickness and build volume. Inspect open edges, intersecting surfaces, thin details and disconnected components. Repair or thicken a working copy where necessary. Orient delicate projections to reduce damage during support removal and place supports where they can be reached. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are conditional starting ranges, not tested presets. Print a representative fragile section before committing to the complete project. Electronics, motors, fasteners, adhesives and other hardware are not implied by a render. SCALE AND DIMENSIONS No physical scale is certified solely from the file name or image. Measure a known dimension after confirming units. For uniform resizing, divide target length by current measured length and multiply by 100. If a native 1:N scale is independently established and the desired scale is 1:T, use N divided by T multiplied by 100. Recheck thicknesses, clearances and support access after resizing. FINISHING AND PRESENTATION Test primer on a sample, remove support marks gently and mask the established paint boundaries. Handle small projections carefully. Colours in the existing finished-display illustration are a proposed miniature finish, not a guarantee of a particular real-world specification. The pictured base or surroundings are illustrative unless separately listed as downloadable geometry. Native STL files do not inherently carry a complete surface paint system. IMAGE AND RIGHTS The current public presentation image is retained. It is an AI-assisted illustration rather than evidence of a tested physical print. The uploader has explicitly authorized free redistribution under CC0. The publishing account does not claim original design authorship. Geometry and appearance remain recognizable; renamed files do not guarantee anonymity. #ScaleModel #ModelMaking #Miniature #3DPrinting #STL #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Savage v7 — RC Aircraft Kit & Finished Display

OVERVIEW Savage v7 — RC Aircraft Kit & Finished Display is supplied as a digital display and model-making project. The illustrated arrangement is a presentation of the represented design, not proof that a physical miniature has been printed, assembled or tested. Check the actual geometry and inventory before planning a build. No additional mechanical operation, working propulsion or flight capability is promised. DOWNLOAD CONTENTS The package preserves every attached portable geometry variant and the supplied STL geometry found in the retained packages. Repeated identical resources are stored once inside each complete ZIP. Geometry filenames are neutral identifiers. The file manifest lists the current downloadable geometry, sizes and integrity hashes. Earlier preparation records and reference photographs are replaced in the public package by this English guide and the existing completed-display image. No original-name correspondence is included. GEOMETRY AND ASSEMBLY Only non-geometric labels and optional header text are changed in the geometry files. STL triangle records and colour information are retained; OBJ vertices, faces, normals, texture coordinates, smoothing declarations and vertex colour numbers are preserved where present. The inspected presentation does not certify watertightness, wall thickness, independent printability, part fit or articulation. Separate variants can represent different inspection or display arrangements; review each file before combining parts. PRINTING ADVICE — UNTESTED Confirm slicer units, intended dimensions, minimum wall thickness and build volume. Inspect open edges, intersecting surfaces, thin details and disconnected components. Repair or thicken a working copy where necessary. Orient delicate projections to reduce damage during support removal and place supports where they can be reached. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are conditional starting ranges, not tested presets. Print a representative fragile section before committing to the complete project. Electronics, motors, fasteners, adhesives and other hardware are not implied by a render. SCALE AND DIMENSIONS No physical scale is certified solely from the file name or image. Measure a known dimension after confirming units. For uniform resizing, divide target length by current measured length and multiply by 100. If a native 1:N scale is independently established and the desired scale is 1:T, use N divided by T multiplied by 100. Recheck thicknesses, clearances and support access after resizing. FINISHING AND PRESENTATION Test primer on a sample, remove support marks gently and mask the established paint boundaries. Handle small projections carefully. Colours in the existing finished-display illustration are a proposed miniature finish, not a guarantee of a particular real-world specification. The pictured base or surroundings are illustrative unless separately listed as downloadable geometry. Native STL files do not inherently carry a complete surface paint system. IMAGE AND RIGHTS The current public presentation image is retained. It is an AI-assisted illustration rather than evidence of a tested physical print. The uploader has explicitly authorized free redistribution under CC0. The publishing account does not claim original design authorship. Geometry and appearance remain recognizable; renamed files do not guarantee anonymity. #ScaleModel #ModelMaking #Miniature #3DPrinting #STL #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Bentley Mulsanne Speed 2017 — Burgundy Display Model

OVERVIEW This Bentley Mulsanne Speed 2017 is offered as an assembled display project. The inspected scene includes the complete source body, four wheels, glazing, mirrors, grilles, lamps and trim. Its presentation retains a proposed burgundy body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The cover shows a proposed completed miniature display; it is not a photograph of a physical print produced or tested by the publisher. COLOUR AND SOURCE APPEARANCE The original plate bitmap is absent. Verified FBX bindings limit it to the existing plate material, shown plain and neutral without invented artwork. The unavailable reference is documented. Proposed colours use existing source materials with imported emission removed. Geometry, UVs and transforms remain unchanged. Factory paint and physical scale are not certified. No manufacturer endorsement or real-world functional specification is claimed. Existing surface detail is retained; source markings may be simplified in the compact colour viewing copy. DOWNLOAD CONTENTS The ZIP includes the editable FBX surface scene, the available associated texture when present, the full-resolution upright coloured 3MF, an English preparation guide, a file inventory and the locally generated presentation image. All filenames are neutral identifiers. Geometry, UV coordinates and material assignments are checked after reopening the FBX in Blender. Absent optional bitmaps are not invented. The image replaces the earlier reference photograph. The manifest lists only the supplied files, their sizes and their current integrity hashes. COLOUR VIEWING COPY A separate upright 3MF contains 1,325,106 triangles from 126 inspected surface mesh objects. Triangle connectivity and coordinates are checked after export without surface decimation. A compact per-triangle colour palette approximates the presentation materials. Texture lettering, transparency and complex native shading are not reproduced exactly in that palette. The editable FBX and available texture resources are included in the ZIP. Maximum span is normalized uniformly to 150 mm solely for viewing. This is not a verified source scale or a certified fabrication dimension. Scene objects are not equivalent to printable part counts. GEOMETRY AND ASSEMBLY The illustrated arrangement is assembled for display. It does not establish that every surface is watertight, independently printable, detachable or mechanically functional. Check wheel spokes, mirrors, grille openings, lamp details and narrow trim. Imported meshes can contain open boundaries, overlapping surfaces, disconnected small features and walls unsuitable for a given printer. Repair, thicken or separate a working copy where necessary; retain the originals as references. No physical print, fit, structural strength, rolling mechanism or articulated motion has been tested. PRINTING ADVICE — UNTESTED First confirm slicer units, overall dimensions, build volume and minimum wall thickness. Inspect wheel spokes, mirrors, grille openings, lamp details and narrow trim at the actual intended print size. Choose supports to protect visible body surfaces and allow access for removal. Consider separate working copies for delicate wheels or projections only after checking their connection geometry. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm may be starting ranges for suitable geometry; they are conditional suggestions rather than tested presets. Print a representative fragile section before committing to the entire scene. SCALE AND FINISHING No native physical units or real-vehicle scale are certified. Use target length divided by current measured length multiplied by 100 to resize after confirming units. If an original 1:N scale is independently established and a target 1:T is desired, use N divided by T multiplied by 100. Recheck thickness and clearances after resizing. Remove supports carefully, test primer on a sample and mask existing paint boundaries. The suggested finish is a proposed burgundy body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The display base and surrounding presentation are illustrative and are not extra printable scenery promised by the download. IMAGE AND RIGHTS The cover is made locally on this PC using ComfyUI/Qwen from a render of this source geometry. Original boundaries, coloured areas and dark details are retained with a local surface mask; the final image is checked against that reference. The asset is free under CC0 following the uploader's explicit redistribution authorization. Original authorship has not been independently verified from the package. #ScaleModel #VehicleModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Chevrolet Corvette C4 — Red Display Model

OVERVIEW This Chevrolet Corvette C4 is offered as an assembled display project. The inspected scene includes the complete source body, four wheels, glazing, mirrors, grilles, lamps and trim. Its presentation retains a proposed red body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The cover shows a proposed completed miniature display; it is not a photograph of a physical print produced or tested by the publisher. COLOUR AND SOURCE APPEARANCE The original plate bitmap is absent. Verified FBX bindings limit it to the existing plate material, shown plain and neutral without invented artwork. The unavailable reference is documented. Proposed colours use existing source materials with imported emission removed. Geometry, UVs and transforms remain unchanged. Factory paint and physical scale are not certified. No manufacturer endorsement or real-world functional specification is claimed. Existing surface detail is retained; source markings may be simplified in the compact colour viewing copy. DOWNLOAD CONTENTS The ZIP includes the editable FBX surface scene, the available associated texture when present, the full-resolution upright coloured 3MF, an English preparation guide, a file inventory and the locally generated presentation image. All filenames are neutral identifiers. Geometry, UV coordinates and material assignments are checked after reopening the FBX in Blender. Absent optional bitmaps are not invented. The image replaces the earlier reference photograph. The manifest lists only the supplied files, their sizes and their current integrity hashes. COLOUR VIEWING COPY A separate upright 3MF contains 721,954 triangles from 1 inspected surface mesh objects. Triangle connectivity and coordinates are checked after export without surface decimation. A compact per-triangle colour palette approximates the presentation materials. Texture lettering, transparency and complex native shading are not reproduced exactly in that palette. The editable FBX and available texture resources are included in the ZIP. Maximum span is normalized uniformly to 150 mm solely for viewing. This is not a verified source scale or a certified fabrication dimension. Scene objects are not equivalent to printable part counts. GEOMETRY AND ASSEMBLY The illustrated arrangement is assembled for display. It does not establish that every surface is watertight, independently printable, detachable or mechanically functional. Check wheel spokes, mirrors, grille openings, lamp details and narrow trim. Imported meshes can contain open boundaries, overlapping surfaces, disconnected small features and walls unsuitable for a given printer. Repair, thicken or separate a working copy where necessary; retain the originals as references. No physical print, fit, structural strength, rolling mechanism or articulated motion has been tested. PRINTING ADVICE — UNTESTED First confirm slicer units, overall dimensions, build volume and minimum wall thickness. Inspect wheel spokes, mirrors, grille openings, lamp details and narrow trim at the actual intended print size. Choose supports to protect visible body surfaces and allow access for removal. Consider separate working copies for delicate wheels or projections only after checking their connection geometry. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm may be starting ranges for suitable geometry; they are conditional suggestions rather than tested presets. Print a representative fragile section before committing to the entire scene. SCALE AND FINISHING No native physical units or real-vehicle scale are certified. Use target length divided by current measured length multiplied by 100 to resize after confirming units. If an original 1:N scale is independently established and a target 1:T is desired, use N divided by T multiplied by 100. Recheck thickness and clearances after resizing. Remove supports carefully, test primer on a sample and mask existing paint boundaries. The suggested finish is a proposed red body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The display base and surrounding presentation are illustrative and are not extra printable scenery promised by the download. IMAGE AND RIGHTS The cover is made locally on this PC using ComfyUI/Qwen from a render of this source geometry. Original boundaries, coloured areas and dark details are retained with a local surface mask; the final image is checked against that reference. The asset is free under CC0 following the uploader's explicit redistribution authorization. Original authorship has not been independently verified from the package. #ScaleModel #VehicleModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Chevrolet HHR — Blue Display Model

OVERVIEW This Chevrolet HHR is offered as an assembled display project. The inspected scene includes the complete source body, four wheels, glazing, mirrors, grilles, lamps and trim. Its presentation retains a proposed blue body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The cover shows a proposed completed miniature display; it is not a photograph of a physical print produced or tested by the publisher. COLOUR AND SOURCE APPEARANCE The original plate bitmap is absent. Verified FBX bindings limit it to the existing plate material, shown plain and neutral without invented artwork. The unavailable reference is documented. Proposed colours use existing source materials with imported emission removed. Geometry, UVs and transforms remain unchanged. Factory paint and physical scale are not certified. No manufacturer endorsement or real-world functional specification is claimed. Existing surface detail is retained; source markings may be simplified in the compact colour viewing copy. DOWNLOAD CONTENTS The ZIP includes the editable FBX surface scene, the available associated texture when present, the full-resolution upright coloured 3MF, an English preparation guide, a file inventory and the locally generated presentation image. All filenames are neutral identifiers. Geometry, UV coordinates and material assignments are checked after reopening the FBX in Blender. Absent optional bitmaps are not invented. The image replaces the earlier reference photograph. The manifest lists only the supplied files, their sizes and their current integrity hashes. COLOUR VIEWING COPY A separate upright 3MF contains 790,310 triangles from 1 inspected surface mesh objects. Triangle connectivity and coordinates are checked after export without surface decimation. A compact per-triangle colour palette approximates the presentation materials. Texture lettering, transparency and complex native shading are not reproduced exactly in that palette. The editable FBX and available texture resources are included in the ZIP. Maximum span is normalized uniformly to 150 mm solely for viewing. This is not a verified source scale or a certified fabrication dimension. Scene objects are not equivalent to printable part counts. GEOMETRY AND ASSEMBLY The illustrated arrangement is assembled for display. It does not establish that every surface is watertight, independently printable, detachable or mechanically functional. Check wheel spokes, mirrors, grille openings, lamp details and narrow trim. Imported meshes can contain open boundaries, overlapping surfaces, disconnected small features and walls unsuitable for a given printer. Repair, thicken or separate a working copy where necessary; retain the originals as references. No physical print, fit, structural strength, rolling mechanism or articulated motion has been tested. PRINTING ADVICE — UNTESTED First confirm slicer units, overall dimensions, build volume and minimum wall thickness. Inspect wheel spokes, mirrors, grille openings, lamp details and narrow trim at the actual intended print size. Choose supports to protect visible body surfaces and allow access for removal. Consider separate working copies for delicate wheels or projections only after checking their connection geometry. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm may be starting ranges for suitable geometry; they are conditional suggestions rather than tested presets. Print a representative fragile section before committing to the entire scene. SCALE AND FINISHING No native physical units or real-vehicle scale are certified. Use target length divided by current measured length multiplied by 100 to resize after confirming units. If an original 1:N scale is independently established and a target 1:T is desired, use N divided by T multiplied by 100. Recheck thickness and clearances after resizing. Remove supports carefully, test primer on a sample and mask existing paint boundaries. The suggested finish is a proposed blue body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The display base and surrounding presentation are illustrative and are not extra printable scenery promised by the download. IMAGE AND RIGHTS The cover is made locally on this PC using ComfyUI/Qwen from a render of this source geometry. Original boundaries, coloured areas and dark details are retained with a local surface mask; the final image is checked against that reference. The asset is free under CC0 following the uploader's explicit redistribution authorization. Original authorship has not been independently verified from the package. #ScaleModel #VehicleModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Chevrolet Opala 1978 — Cream Display Model

OVERVIEW This Chevrolet Opala 1978 is offered as an assembled display project. The inspected scene includes the complete source body, four wheels, glazing, mirrors, grilles, lamps and trim. Its presentation retains a proposed cream body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The cover shows a proposed completed miniature display; it is not a photograph of a physical print produced or tested by the publisher. COLOUR AND SOURCE APPEARANCE The original plate bitmap is absent. Verified FBX bindings limit it to the existing plate material, shown plain and neutral without invented artwork. The unavailable reference is documented. Proposed colours use existing source materials with imported emission removed. Geometry, UVs and transforms remain unchanged. Factory paint and physical scale are not certified. No manufacturer endorsement or real-world functional specification is claimed. Existing surface detail is retained; source markings may be simplified in the compact colour viewing copy. DOWNLOAD CONTENTS The ZIP includes the editable FBX surface scene, the available associated texture when present, the full-resolution upright coloured 3MF, an English preparation guide, a file inventory and the locally generated presentation image. All filenames are neutral identifiers. Geometry, UV coordinates and material assignments are checked after reopening the FBX in Blender. Absent optional bitmaps are not invented. The image replaces the earlier reference photograph. The manifest lists only the supplied files, their sizes and their current integrity hashes. COLOUR VIEWING COPY A separate upright 3MF contains 1,407,318 triangles from 1 inspected surface mesh objects. Triangle connectivity and coordinates are checked after export without surface decimation. A compact per-triangle colour palette approximates the presentation materials. Texture lettering, transparency and complex native shading are not reproduced exactly in that palette. The editable FBX and available texture resources are included in the ZIP. Maximum span is normalized uniformly to 150 mm solely for viewing. This is not a verified source scale or a certified fabrication dimension. Scene objects are not equivalent to printable part counts. GEOMETRY AND ASSEMBLY The illustrated arrangement is assembled for display. It does not establish that every surface is watertight, independently printable, detachable or mechanically functional. Check wheel spokes, mirrors, grille openings, lamp details and narrow trim. Imported meshes can contain open boundaries, overlapping surfaces, disconnected small features and walls unsuitable for a given printer. Repair, thicken or separate a working copy where necessary; retain the originals as references. No physical print, fit, structural strength, rolling mechanism or articulated motion has been tested. PRINTING ADVICE — UNTESTED First confirm slicer units, overall dimensions, build volume and minimum wall thickness. Inspect wheel spokes, mirrors, grille openings, lamp details and narrow trim at the actual intended print size. Choose supports to protect visible body surfaces and allow access for removal. Consider separate working copies for delicate wheels or projections only after checking their connection geometry. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm may be starting ranges for suitable geometry; they are conditional suggestions rather than tested presets. Print a representative fragile section before committing to the entire scene. SCALE AND FINISHING No native physical units or real-vehicle scale are certified. Use target length divided by current measured length multiplied by 100 to resize after confirming units. If an original 1:N scale is independently established and a target 1:T is desired, use N divided by T multiplied by 100. Recheck thickness and clearances after resizing. Remove supports carefully, test primer on a sample and mask existing paint boundaries. The suggested finish is a proposed cream body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The display base and surrounding presentation are illustrative and are not extra printable scenery promised by the download. IMAGE AND RIGHTS The cover is made locally on this PC using ComfyUI/Qwen from a render of this source geometry. Original boundaries, coloured areas and dark details are retained with a local surface mask; the final image is checked against that reference. The asset is free under CC0 following the uploader's explicit redistribution authorization. Original authorship has not been independently verified from the package. #ScaleModel #VehicleModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

DeLorean DMC-12 — Silver Display Model

OVERVIEW This DeLorean DMC-12 is offered as an assembled display project. The inspected scene includes the complete source body, four wheels, glazing, mirrors, grilles, lamps and trim. Its presentation retains a proposed silver body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The cover shows a proposed completed miniature display; it is not a photograph of a physical print produced or tested by the publisher. COLOUR AND SOURCE APPEARANCE The original plate bitmap is absent. Verified FBX bindings limit it to the existing plate material, shown plain and neutral without invented artwork. The unavailable reference is documented. Proposed colours use existing source materials with imported emission removed. Geometry, UVs and transforms remain unchanged. Factory paint and physical scale are not certified. No manufacturer endorsement or real-world functional specification is claimed. Existing surface detail is retained; source markings may be simplified in the compact colour viewing copy. DOWNLOAD CONTENTS The ZIP includes the editable FBX surface scene, the available associated texture when present, the full-resolution upright coloured 3MF, an English preparation guide, a file inventory and the locally generated presentation image. All filenames are neutral identifiers. Geometry, UV coordinates and material assignments are checked after reopening the FBX in Blender. Absent optional bitmaps are not invented. The image replaces the earlier reference photograph. The manifest lists only the supplied files, their sizes and their current integrity hashes. COLOUR VIEWING COPY A separate upright 3MF contains 1,732,308 triangles from 2 inspected surface mesh objects. Triangle connectivity and coordinates are checked after export without surface decimation. A compact per-triangle colour palette approximates the presentation materials. Texture lettering, transparency and complex native shading are not reproduced exactly in that palette. The editable FBX and available texture resources are included in the ZIP. Maximum span is normalized uniformly to 150 mm solely for viewing. This is not a verified source scale or a certified fabrication dimension. Scene objects are not equivalent to printable part counts. GEOMETRY AND ASSEMBLY The illustrated arrangement is assembled for display. It does not establish that every surface is watertight, independently printable, detachable or mechanically functional. Check wheel spokes, mirrors, grille openings, lamp details and narrow trim. Imported meshes can contain open boundaries, overlapping surfaces, disconnected small features and walls unsuitable for a given printer. Repair, thicken or separate a working copy where necessary; retain the originals as references. No physical print, fit, structural strength, rolling mechanism or articulated motion has been tested. PRINTING ADVICE — UNTESTED First confirm slicer units, overall dimensions, build volume and minimum wall thickness. Inspect wheel spokes, mirrors, grille openings, lamp details and narrow trim at the actual intended print size. Choose supports to protect visible body surfaces and allow access for removal. Consider separate working copies for delicate wheels or projections only after checking their connection geometry. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm may be starting ranges for suitable geometry; they are conditional suggestions rather than tested presets. Print a representative fragile section before committing to the entire scene. SCALE AND FINISHING No native physical units or real-vehicle scale are certified. Use target length divided by current measured length multiplied by 100 to resize after confirming units. If an original 1:N scale is independently established and a target 1:T is desired, use N divided by T multiplied by 100. Recheck thickness and clearances after resizing. Remove supports carefully, test primer on a sample and mask existing paint boundaries. The suggested finish is a proposed silver body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The display base and surrounding presentation are illustrative and are not extra printable scenery promised by the download. IMAGE AND RIGHTS The cover is made locally on this PC using ComfyUI/Qwen from a render of this source geometry. Original boundaries, coloured areas and dark details are retained with a local surface mask; the final image is checked against that reference. The asset is free under CC0 following the uploader's explicit redistribution authorization. Original authorship has not been independently verified from the package. #ScaleModel #VehicleModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Dodge Challenger SXT — Orange Display Model

OVERVIEW This Dodge Challenger SXT is offered as an assembled display project. The inspected scene includes the complete source body, four wheels, glazing, mirrors, grilles, lamps and trim. Its presentation retains a proposed orange body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The cover shows a proposed completed miniature display; it is not a photograph of a physical print produced or tested by the publisher. COLOUR AND SOURCE APPEARANCE The original plate bitmap is absent. Verified FBX bindings limit it to the existing plate material, shown plain and neutral without invented artwork. The unavailable reference is documented. Proposed colours use existing source materials with imported emission removed. Geometry, UVs and transforms remain unchanged. Factory paint and physical scale are not certified. No manufacturer endorsement or real-world functional specification is claimed. Existing surface detail is retained; source markings may be simplified in the compact colour viewing copy. DOWNLOAD CONTENTS The ZIP includes the editable FBX surface scene, the available associated texture when present, the full-resolution upright coloured 3MF, an English preparation guide, a file inventory and the locally generated presentation image. All filenames are neutral identifiers. Geometry, UV coordinates and material assignments are checked after reopening the FBX in Blender. Absent optional bitmaps are not invented. The image replaces the earlier reference photograph. The manifest lists only the supplied files, their sizes and their current integrity hashes. COLOUR VIEWING COPY A separate upright 3MF contains 884,811 triangles from 1 inspected surface mesh objects. Triangle connectivity and coordinates are checked after export without surface decimation. A compact per-triangle colour palette approximates the presentation materials. Texture lettering, transparency and complex native shading are not reproduced exactly in that palette. The editable FBX and available texture resources are included in the ZIP. Maximum span is normalized uniformly to 150 mm solely for viewing. This is not a verified source scale or a certified fabrication dimension. Scene objects are not equivalent to printable part counts. GEOMETRY AND ASSEMBLY The illustrated arrangement is assembled for display. It does not establish that every surface is watertight, independently printable, detachable or mechanically functional. Check wheel spokes, mirrors, grille openings, lamp details and narrow trim. Imported meshes can contain open boundaries, overlapping surfaces, disconnected small features and walls unsuitable for a given printer. Repair, thicken or separate a working copy where necessary; retain the originals as references. No physical print, fit, structural strength, rolling mechanism or articulated motion has been tested. PRINTING ADVICE — UNTESTED First confirm slicer units, overall dimensions, build volume and minimum wall thickness. Inspect wheel spokes, mirrors, grille openings, lamp details and narrow trim at the actual intended print size. Choose supports to protect visible body surfaces and allow access for removal. Consider separate working copies for delicate wheels or projections only after checking their connection geometry. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm may be starting ranges for suitable geometry; they are conditional suggestions rather than tested presets. Print a representative fragile section before committing to the entire scene. SCALE AND FINISHING No native physical units or real-vehicle scale are certified. Use target length divided by current measured length multiplied by 100 to resize after confirming units. If an original 1:N scale is independently established and a target 1:T is desired, use N divided by T multiplied by 100. Recheck thickness and clearances after resizing. Remove supports carefully, test primer on a sample and mask existing paint boundaries. The suggested finish is a proposed orange body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The display base and surrounding presentation are illustrative and are not extra printable scenery promised by the download. IMAGE AND RIGHTS The cover is made locally on this PC using ComfyUI/Qwen from a render of this source geometry. Original boundaries, coloured areas and dark details are retained with a local surface mask; the final image is checked against that reference. The asset is free under CC0 following the uploader's explicit redistribution authorization. Original authorship has not been independently verified from the package. #ScaleModel #VehicleModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Dodge Charger R/T — Red Display Model

OVERVIEW This Dodge Charger R/T is offered as an assembled display project. The inspected scene includes the complete source body, four wheels, glazing, mirrors, grilles, lamps and trim. Its presentation retains a proposed red body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The cover shows a proposed completed miniature display; it is not a photograph of a physical print produced or tested by the publisher. COLOUR AND SOURCE APPEARANCE The original plate bitmap is absent. Verified FBX bindings limit it to the existing plate material, shown plain and neutral without invented artwork. The unavailable reference is documented. Proposed colours use existing source materials with imported emission removed. Geometry, UVs and transforms remain unchanged. Factory paint and physical scale are not certified. No manufacturer endorsement or real-world functional specification is claimed. Existing surface detail is retained; source markings may be simplified in the compact colour viewing copy. DOWNLOAD CONTENTS The ZIP includes the editable FBX surface scene, the available associated texture when present, the full-resolution upright coloured 3MF, an English preparation guide, a file inventory and the locally generated presentation image. All filenames are neutral identifiers. Geometry, UV coordinates and material assignments are checked after reopening the FBX in Blender. Absent optional bitmaps are not invented. The image replaces the earlier reference photograph. The manifest lists only the supplied files, their sizes and their current integrity hashes. COLOUR VIEWING COPY A separate upright 3MF contains 1,454,273 triangles from 1 inspected surface mesh objects. Triangle connectivity and coordinates are checked after export without surface decimation. A compact per-triangle colour palette approximates the presentation materials. Texture lettering, transparency and complex native shading are not reproduced exactly in that palette. The editable FBX and available texture resources are included in the ZIP. Maximum span is normalized uniformly to 150 mm solely for viewing. This is not a verified source scale or a certified fabrication dimension. Scene objects are not equivalent to printable part counts. GEOMETRY AND ASSEMBLY The illustrated arrangement is assembled for display. It does not establish that every surface is watertight, independently printable, detachable or mechanically functional. Check wheel spokes, mirrors, grille openings, lamp details and narrow trim. Imported meshes can contain open boundaries, overlapping surfaces, disconnected small features and walls unsuitable for a given printer. Repair, thicken or separate a working copy where necessary; retain the originals as references. No physical print, fit, structural strength, rolling mechanism or articulated motion has been tested. PRINTING ADVICE — UNTESTED First confirm slicer units, overall dimensions, build volume and minimum wall thickness. Inspect wheel spokes, mirrors, grille openings, lamp details and narrow trim at the actual intended print size. Choose supports to protect visible body surfaces and allow access for removal. Consider separate working copies for delicate wheels or projections only after checking their connection geometry. Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm may be starting ranges for suitable geometry; they are conditional suggestions rather than tested presets. Print a representative fragile section before committing to the entire scene. SCALE AND FINISHING No native physical units or real-vehicle scale are certified. Use target length divided by current measured length multiplied by 100 to resize after confirming units. If an original 1:N scale is independently established and a target 1:T is desired, use N divided by T multiplied by 100. Recheck thickness and clearances after resizing. Remove supports carefully, test primer on a sample and mask existing paint boundaries. The suggested finish is a proposed red body finish with dark glazing, black tyres, metallic wheels and trim, and plain neutral plates. The display base and surrounding presentation are illustrative and are not extra printable scenery promised by the download. IMAGE AND RIGHTS The cover is made locally on this PC using ComfyUI/Qwen from a render of this source geometry. Original boundaries, coloured areas and dark details are retained with a local surface mask; the final image is checked against that reference. The asset is free under CC0 following the uploader's explicit redistribution authorization. Original authorship has not been independently verified from the package. #ScaleModel #VehicleModel #3DPrinting #ModelMaking #Miniature #CC0

Technology: Sin probar
material: —
Difficulty: Sin especificar