MESHOPIAScale modelling & RC2 modelos etiquetados
CPU cooler mount adapter for a BC-250 board. The author reports that using the cooler (https://a.co/d/gyw5dgC) reduced max temperature from 92°C to 72°C in testing. Use the Intel brackets (longer ones) to mount to the 3D printed adapter. M4 nut and bolts are required for mounting.
3D model: Custom mounting adapter to fit a DeepCool AN600 low-profile cooler onto the AMD BC-250 motherboard. Installation Hardware: - Bracket Requirement: This adapter is designed to be used specifically with the Intel mounting brackets included with the DeepCool AN600 kit. - 4x M3 x 12mm bolts - 4x M3 x 20mm bolts - 8x M3 nuts Recommended Materials: The author recommends using high-temperature, stiff filaments to prevent warping or sagging under thermal load, listing ASA, ABS, or Carbon Fiber/Glass Fiber reinforced PETG (CF-PETG / GF-PETG) as best options. Suggested Print Settings: - Walls: 4 - Top/Bottom Layers: 6 - Infill: 30% Cubic Note: The author states that high wall counts and the cubic infill pattern ensure the structural rigidity needed for consistent mounting pressure.