Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

1 modelo etiquetado · Página 1 de 1

#80x80 fan

Descubre modelos 3D etiquetados como 80x80 fan y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Prusa XL Buddy cover for 80x80 fan and a DC barrel jack

Prusa XL Buddy cover for 80x80 fan and a DC barrel jack

This model is a remix of the "Prusa XL Buddy cover" designed to accommodate an 80x80 fan and a DC barrel jack. Its purpose is to provide a customized housing for these specific components on a Prusa XL printer. Practical uses include upgrading the printer's cooling or ventilation setup. If using a 24V fan, it can be powered directly from the XL board. Included parts: - PrusaXL_Cover_Fan_80x80.stl - PrusaXL_Cover_Fan_80x80.step Printing and assembly guidance: To mount the fan, four screws with countersunk heads (M4x14 or longer) and nuts are required. Because the rear side of this remix is thicker, the original Buddy cover screws must be replaced with longer M3x12 screws.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar