6 tagged models · Page 1 of 1

#3MF project

Discover 3D models tagged 3MF project and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Compartment Organizer Box for RC Parts - Original and V2 3MF

Organize small RC hardware in a compartmented storage box. The supplied reference shows an open rectangular tray with rows of separate compartments and a matching lid beside it. The screws, springs, nuts and other small items in that photograph illustrate its use and are not included in this digital download. Two 3MF project files are supplied: the original Complete Parts Box and a version labeled V2. They have been renamed in English while preserving their original contents. Keep the projects distinct when comparing their components and layouts; identical dimensions, hinge details and compatibility between revisions have not been verified. The lid in the reference carries an Axial graphic, so inspect the supplied projects for any included lettering or decorative elements before printing. Open each 3MF in compatible slicing software and inspect its parts, layout and any embedded settings. Printer-specific presets should be reviewed for your own machine. No physical closure test, load rating, measured compartment dimensions or tested print profile is documented by MESHOPIA. Hardware and stored RC parts are not supplied. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. An additional STL of the original box base is included for a compatible 3D preview. It was exported from the original 3MF mesh without changing its geometry. This STL contains only the base; use the 3MF projects for the trays, lid, clips and other project components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Bevel-Gear Differential Components for RC Projects - 3MF

Explore a compact bevel-gear differential design for an RC mechanical project. Inspection of the supplied 3MF geometry shows a large toothed bevel gear, an open carrier, internal bevel gears, circular end pieces and shaft forms with a hexagonal opening. The source calls it a working differential; MESHOPIA has not independently tested its movement, load capacity or vehicle fit. The download contains one unchanged source project, renamed 01-bevel-gear-differential-project.3mf. The new cover reconstructs eleven source mesh objects from their component coordinates to show the mechanism together. The original 3MF retains its source project and build arrangement. Inspect all objects and any embedded slicer settings before preparing separate parts. No particular vehicle scale, complete assembly guide or tested print profile is established here. Check gear engagement, shaft interfaces, clearances and any required hardware against your intended application. No motor, vehicle chassis or replacement external hardware is added to the cover. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Extra-Long Body Posts for SCX10-Style RC Projects - 3MF

Adapt a suitable RC body mounting arrangement with this collection of long post meshes. The actual 3MF contains eight source post objects. They have repeated transverse adjustment holes, rounded tips and collar or mounting-tab variations. The source filename identifies SCX10; physical fit to a particular chassis or body has not been independently verified. One original project is supplied as 01-extra-long-scx10-body-posts.3mf. Its source objects and project arrangement are preserved. The new cover rotates and separates the eight existing mesh objects to show their features; it does not add copies or alter the download geometry. The vehicle and body shell in the supplied installation photograph are not included. No clips, screws or other external fastening hardware is supplied. Compare post diameter, hole spacing, usable length and mounting-tab geometry against your existing hardware before printing. No verified scale or tested printing profile is established. MESHOPIA has not tested body retention, vibration resistance or strength. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Tacoma-Style 1:16 RC Pickup Body and Mounting Parts - Original 3MF Project

A Tacoma-style pickup body project supplied as one original 3MF file containing multiple separate meshes. The inspected geometry includes a four-door cab section with window openings and door detailing, a broad front grille and bumper with molded lettering, a ribbed pickup-bed section, rear body panels, light-shaped inserts, window-shaped inserts, side mirrors, mounting rails, brackets and small recessed or bored connectors. The extracted project contains 32 mesh instances; repeated instances and multi-part components mean this is not a verified count of unique finished parts. One unchanged original 3MF project is included under a descriptive English filename. Its internal model geometry and project contents are retained. The 1:16 designation comes from the source project name and has not been independently checked against a full-size vehicle. This is a body and associated mounting-parts project, not a complete powered RC truck. The wheels, tires, suspension, drivetrain, electronics and illuminated lamps shown in the supplied assembly photograph are not included as a verified complete system. It presents the intended body appearance without the reference vehicle wheels or running gear. It is not a photograph of a tested MESHOPIA build and interprets lamp trim and the cabin interior; the pictured seats, steering wheel and finished lamp appearance are illustrative and are not verified included components. Use the downloadable geometry to assess the actual components and interfaces.The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. Inspect the 3MF object list, original component orientations, fastener bores and body-mount spacing in compatible software before printing. Establish material, supports, tolerances and assembly order from your own printer and intended chassis. No chassis-fit guarantee, validated wiring plan, working-light specification or tested print settings are supplied. MESHOPIA has not tested printing, fit, assembly or powered operation. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Kamaz-Style Rally Truck Body and Interior Parts - Original 3MF Project

A rally-truck body and detailing project supplied as one original 3MF file. Inspection of the source geometry identified angular cab-shell variants with windshield and side-window openings, separate doors, a long box-shaped rear body with wheel arches, bumpers, a front bull bar with round lamp details, towing-loop shapes, interior framing, steering-wheel and gear-lever details, seats, mirrors, roof vents and decorative horn shapes. Additional panels, mounting blocks, trim strips and grids are present. Some seat and lettering meshes are repeated variants. The inspected scene contains 63 mesh instances, including repeated objects and alternatives; this is not a count of 63 unique printable parts or an assembly bill of materials. The download contains the unchanged original 3MF project, renamed in English. Individual STL exports and illustrated assembly instructions are not supplied separately. Open the project in a compatible slicer or modeling tool and inspect its objects before arranging a print. This is a body and detail collection. Inspection did not identify a complete mechanical chassis, wheels, tires, drivetrain, radio equipment, motor or battery in the supplied geometry. The purchased reference photograph shows a complete truck, but that photograph does not establish that its running gear is included in this file. Decorative lights and interior details are modeled shapes, not working electrical components. Original geometry includes raised KAMAZ and SPARCO lettering; the original file is preserved without edits. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. No scale, donor chassis compatibility, print settings, hardware requirements or tested assembly has been verified. Inspect wall thickness, clearances, mesh variants and mounting interfaces for your own project. MESHOPIA has not physically printed or tested this model.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

EDF-Style RC Car Body and Chassis Parts - Sixteen STL Files and Original 3MF

An electric-ducted-fan-style RC car body and chassis collection with sixteen original STL files and one original 3MF project. Individual STL meshes and all sixteen mesh resources inside the 3MF were visually reviewed using software-rendered orthographic previews.The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. The supplied 3MF contains a grouped parts project with sixteen mesh resources. It overlaps with the separately supplied STL components and includes geometry or tessellation differences in some parts; do not assume it is byte-identical to the STL set or print all files as independent required components. Its project arrangement is not verified assembly guidance. All seventeen original files are preserved unchanged and renamed in English. Review meshes were generated only for inspection and are not additional supplied originals. The source photograph shows an assembled example with an exposed black ducted-fan unit, wheels and wiring. No wheel or tire mesh was found in the reviewed files. Real EDF fan/motor, ESC, battery, servo, receiver, wiring, bearings and metal hardware are not supplied. The folder names the project Jet Powered Car; the available evidence supports an EDF-style miniature layout, not a supplied fuel turbine. The new cover must represent body and chassis geometry without presenting absent running gear or electrical equipment as supplied parts. Actual assembled dimensions, fan compatibility, bearing sizes, steering performance and required copy counts have not been independently verified. No tested fan speed, thrust, vehicle speed, structural load, material choice, print settings or assembly instructions are claimed. MESHOPIA has not physically printed, assembled or operated this collection. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar