Pipe Load for Turbo Racing 1/76 scale C50 Semi Truck
Pipe Load for the Turbo Racing 1/76 scale RC C50 Semi Truck Purpose This model serves as an alternative cargo load for the Turbo Racing 1/76 scale C50 semi truck trailer, providing an option other than the standard container or empty trailer configurations. Practical Uses Designed for use with the Turbo Racing C50 scale model, this load can be weighted to match the nose weight of the original box container. Users can add an M10 steel full nut into the provided cutout to achieve the necessary weight, using a small piece of Blue Tack (poster putty) to prevent rattling. Included Parts - Pipe load - Tie-down straps (Version 1: exact shape; Version 2: optimized for neater printing) Printing and Assembly Guidance Print the pipes standing vertically. A color change can be implemented during printing to create colored protective end caps. The pipes are attached to the trailer using a narrow strip of double-sided tape. The tie-down straps clip into place over the pipe load and the trailer bed. If using Strap Version 2, the center section must be cut out with side cutters to match the shape of Version 1. Author's Print Settings - Material: PLA - Layer height: 0.2mm - Perimeters: 2 - Top/Bottom layers: 4 - Infill: 15% - Supports: None - Printer used: Prusa Mk3S+
- Tecnología
- Sin probar
- Material
- —
- Dificultad
- Sin especificar