MESHOPIAModel sheet · for your workshop
Tools
xTool S1 to Fumeclear FC-2003 exhaust adapter
Authorship, licence & source
- Original author
- Sand Tomorrow
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1136289
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This adapter is designed to connect the exhaust from an xTool S1 to a Fumeclear FC-2003 fume extractor. The author states this part allows for a shorter exhaust run compared to using a silicone adapter.
Practical Uses
It can be used to facilitate a more direct exhaust path. The author notes it may work for other Fumeclear parts or can be remixed to fit different adapters.
Included Parts
- Exhaust Adapter_final.stl
Printing/Assembly Guidance
The author designed this part with TPU in mind and reports that it works well with that material. The xTool S1 side has a 90mm inside diameter, and the Fumeclear side has a 66mm outside diameter.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.