Model information
Description
Xpress Execute FT1S Bumper, Final
Purpose
This model is a replacement bumper designed for the Xpress Execute FT1S. According to the author, this version is intended to perform better than the original bumper, specifically maintaining durability during racing and hard crashes.
Practical Uses
This part is intended for use in RC racing environments. The author reports that the bumper successfully withstood 7 hours of track use and hard crashes.
Included Parts
- Bumper_Final_version.stl
Printing and Assembly Guidance
The author recommends using Ninjaflex 85A material. Suggested print settings include:
- Top/Bottom layers: 0
- Walls: 1
- Infill: 50%
The author suggests scaling up the Z-value to 12mm, or to your desired height.
Original text by the author on Printables
<p>Material Ninjaflex 85A</p><p>Top/Bottom layer = 0</p><p>Walls = 1</p><p>Infill = 50%</p><p>Scale up Z-value to 12mm (or the height you want)</p><p> </p><p>Update:</p><p>Have spent the day on track and racing for 7hours and done some hard crashes and the bumper is holding up and is working really good! Better than original bumper</p>
Questions and contributions