Model information
Description
A battery holder designed for the X-Ray M18T to accommodate larger batteries, such as a 2s 1100 mAh LiPo, which otherwise do not fit in the chassis and stand on edge. This part raises the floor to the rim level to provide a flat mounting surface. It includes a channel to push a reusable cable tie through (e.g., "Workzone 250x7.5mm") to act as a battery strap. The author notes that no provisions are made to secure the part itself to the car other than a tight fit; thin double-sided tape or a small amount of silicone is suggested. The base plate features pre-drilled holes, but the author cautions to ensure screws never puncture the battery due to fire risk.
Original text by the author on Printables
<p>A larger battery doesn't fit into the chassis and “stands on edge” on the rim. This part raises the floor to the rim level so the battery can be mounted on a flat surface. Push a reusable cable tie e.g. “Workzone 250x7.5mm” through the channel as battery strap.</p><p>No provisions are made to secure the part itself to the car (other than being a fairly tight fit). Use e.g. thin double-sided tape or a small amount of silicon. There are a few pre-drilled holes in the base plate but take care that screws can never puncture the battery (risk of fire).</p>
There are no comments yet. Verified ratings and makes appear separately below.