MESHOPIAModel sheet · for your workshop
Vehicles
WLtoys Drift A959 Steering System Redesign
Authorship, licence & source
- Original author
- Manuel Roman
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 10 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1540942
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Scales
- 1:18
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Purpose
This redesigned front steering system for the WLtoys A959 is intended to increase the steering angle to improve drift performance. The design removes front traction to allow for more freedom and control during drifts.
Practical Uses
The system is designed for controlled drifting and smoother transitions. The modification is non-destructive, allowing the vehicle to be returned to its original state without damaging any parts. The author suggests using a gyro for an improved experience.
Included Parts
- brazo direccion .stl
- brazo servo .stl
- Drag_link .stl
- horquilla .stl
- masa.stl
- placa direccion inf .stl
- placa direccion sup .stl
- Servo_Bracket .stl
- soporte masa .stl
Printing and Assembly Guidance
The author reports all parts were printed in PETG. The horquilla (fork) and brazo de direccion (steering arm) must be printed as mirrors. Only the steering arm and servo arm require supports. Required hardware includes 10 M2 screws: 2x M220 and 8x M28.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.