Información del modelo
Descripción
Whisbang is a whistling accessory for RC activities. Its hollow body and openings are intended to produce sound as it moves through the air; it has no explosive function.
POSSIBLE USES
- Add an acoustic effect to a controlled RC demonstration.
- Explore airflow and resonant cavities in a hobby model.
INCLUDED FILES
- The supplied STL geometry.
- The accompanying PDF document.
GENERAL PRINTING SUGGESTIONS
PLA is a straightforward material for an initial trial. Consider PETG, ASA or another material only when the intended environment requires different heat resistance, outdoor durability or toughness. A 0.20 mm layer height is a general starting point; a finer layer may improve surface detail. Choose a stable printing face and inspect overhangs, bridges and support requirements in the slicer. Print a sample or fit test before making multiple copies.
CHECK BEFORE USE
Do not add pyrotechnics or explosive loads. Avoid dropping or launching the accessory toward people, animals or property, and follow the rules of the RC flying field. The imported listing indicates FDM with PLA or PETG; these general suggestions must be checked against the actual model, printer and slicer profile.
IMAGE PRESENTATION
The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.
Texto original del autor en Printables
Whistling bombs made for dropping from RC planes or drones (in a safe open area free of people and property)
These are printed in flexible TPU and are designed to be as safe and as harmless as possible while still being effective.
Drop them from 200 feet or higher to allow them to reach terminal velocity and produce sound.
The body has a hollow tube which needs to be filled with weights to have the correct balance and penetration through the air.
I use 3, 3/8 ball bearings for the weight but you can use whatever you have, as long as it makes it nose heavy.
push the ball bearings as far up to the nose as possible and glue in place
you can use “red snap crackers” available at fireworks stores for more effect, glue them to the nose or inside the tail.
These can be re-used over and over.
print in a bright color so you can find them.
remove all strings and burs from whistle holes and chamber.
DO NOT use these to scare or harm people or damage property
I am not responsible for any injuries or damage.
be smart, use at your own risk, and be safe.
Preguntas y aportaciones