MESHOPIAModel sheet · for your workshop
RC & Robotics
Upgrades for "A6M2 Zero" by 3DLabPrint
Authorship, licence & source
- Original author
- GP
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 3 files · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/190261
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Upgrades for "A6M2 Zero" by 3DLabPrint
Purpose
This set provides functional upgrades for the A6M2 Zero model aircraft to improve durability and usability. The components aim to protect internal electronics during collisions and landings, and to provide a more reliable method for securing the battery.
Practical Uses
- Battery Protector: Prevents the battery from sliding into and hitting the motor shaft during a collision by providing a wide, flat surface.
- Battery Holder: Replaces the stock velcro opening to provide a more functional battery mounting solution.
- Servo Protector: Protects the servo arm from hitting the ground during belly landings.
Included Parts
- battery-protector.3mf
- A6M2 Batter Holder.3mf
- A6M2-servo-protector.3mf
Printing and Assembly Guidance
- Battery Protector: Use PETG. Use regular slicing; do not use the thin wall method.
- Battery Holder: Use PLA or PETG. This part is intended to replace the default opening, which must be cut away with a knife. Use regular slicing; do not use the thin wall method.
- Servo Protector: Use LW-PLA. Important: Use 3DLabPrint’s thin wall slicing method for this part. For assembly, the author suggests using sticky tape rather than CA glue to allow for periodic replacement.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.