Información del modelo
Descripción
Purpose: This model is a remix of the ACXWA steering arm designed for LDRC vehicles, featuring a wider head and larger holes compared to the original. 1. Practical Uses: It serves as a replacement steering arm for RC cars. If steering binds at full lock, the designer suggests using a zip tie. 2. Included Parts:
- tight_fit_ldrc.stl
- bigger_fit_ldrc.stl
3. Printing/Assembly Guidance: This is a high tolerance print. The designer suggests printing the larger version and using superglue or electrical tape to secure it to the servo if necessary. To assemble, center the servo while the car is on before gluing. Attribution: This is a remix of thing:6490991.
Texto original del autor en Printables
<p>I broke my ACXWA steering arm on my miot and i got a 3d printer so i remixed it with a wider head and bigger holes.<br>If the steering binds at full lock use a zip tie (check image) and that should work very well.<br>Also you its a high tolerance print so i suggest you print the bigger one and worst case you can use some superglue or electrical tape to fix it in place on the servo. Center the servo first while car is on then glue it (and if you want to change it after you glued it you can just cut it off, did that already:))<br>(╯°□°)╯︵ ┻━┻<br>update→better fitment</p>
Preguntas y aportaciones