A universal wall hanger designed for RC cars, compatible with scales from 1/8 down to 1/16. The author reports printing this with 15% infill on PETG using standard settings on a Bambu Lab P1S, noting it results in a strong part with a print time of approximately 1 hour and 20 minutes.
Original text by the author on Printables
<p> Printed with 15% infill on petg on standard settings on bambu lab p1s.</p><p><br>It comes out very strong, with only the needed amount of material - print time for one is about 1h20</p><p><br>Sorry for the crappy photos, but cant be bothered ;) I hope someone makes use of this!</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.