The author recommends using a light filament such as PLA, ABS, or PETG and advises against using others as it may increase drag. The author suggests using supports and adhesion, and recommends sanding the bottom of the propeller for best use. Printing instructions provided: print at 0% infill and 0.8mm wall thickness (2 lines), and print at 0.16mm or lower layer height.
Original text by the author on Printables
<p>I would recommend using a light filliment such as PLA ABS and PETG not any others for it may increase drag. Use suports and adhesion, make sure to sand the bottom of the propeller for best use, print at 0% infill and 0.8mm wall thickness 2 lines, and print at 0.16mm or lower layer hight.</p><p>Happy Printing.</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.