MESHOPIAModel sheet · for your workshop
RC & Robotics
TRX4 custom ESC mount
Authorship, licence & source
- Original author
- ahead_RC
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/289418
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
TRX4 custom ESC mount
Purpose
This model is an ESC mount designed to be bolted directly onto the inner fender of a TRX4. The hole spacing is specifically engineered to match the XL-5, allowing the ESC to be mounted in the same location to maintain the vehicle's original weight bias.
Practical Uses
It serves as a mounting plate for an Electronic Speed Controller (ESC) within a TRX4 crawler, providing a secure location that does not interfere with the vehicle's balance.
Included Parts
- 1x ESC mount (ESC_mount.stl)
Assembly Guidance
To attach the mount to the inner fender, use 2x M3x10mm countersunk screws. Once the mount is secured, the ESC can be attached to the mounting plate using hot glue or zip ties.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.