MESHOPIAModel sheet · for your workshop
RC & Mechanics
Dust cover for Traxxas Slash LCG 4WD
Authorship, licence & source
- Original author
- vnkpvl
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 7 files · STL
- Declared source
- Printables
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air.
Preparation, compatibility, and printing
The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.
Manufacturing & assembly notes
The documented assembly uses nine M3 × 6 screws for the grilles and another M3 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.
Declared changes from the original
Imported CC0 model with an automated editorial listing; the generated photographic cover is pending.