MESHOPIAModel sheet · for your workshop
Accessories
Tesla Cybertruck Rooftop Tent HVAC Adapter Kit – STL Files for Portable AC Vent Mount (3D Printable)
Authorship, licence & source
- Original author
- Markandey Singh
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 7 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1678065
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Tesla Cybertruck Rooftop Tent HVAC Adapter Kit
Purpose
This 3D-printed adapter kit is designed to turn a Tesla Cybertruck into a climate-controlled camping setup. It allows users to route the vehicle's interior HVAC airflow directly into a rooftop tent, providing heating or cooling without the need for separate equipment. It is intended for use while the vehicle is in Camp Mode.
Practical Uses
This kit is suitable for camping in extreme hot or cold weather, stealth camping with climate control, and long road trips. It can be used to maintain comfort for pets or children overnight inside a rooftop tent.
Included Parts
The package includes several STL files for printing:
- Vent end fitting
- Window inside and window outside components (multiple variations including a square fitting)
- Tent end fitting
- TPU seal
Additional Parts Required
To complete the assembly, you will need:
- Standard 4-inch flexible HVAC ducting
- Hose clamps or duct clamps
- A plywood sheet (to create a custom window insert)
- Rubber sealing strip or weatherstripping (or foam)
Assembly Guidance
1. Create a window insert by tracing the open window frame onto plywood, cutting it to shape, and cutting a 4-inch hole for the duct. Use rubber or foam sealing for an airtight fit.
2. Attach the printed adapter to the Cybertruck HVAC vent.
3. Connect the 4-inch duct to the adapter and secure it with clamps.
4. Route the duct through the plywood window insert and into the rooftop tent.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.