MESHOPIAModel sheet · for your workshop
Toys and games
Replacement battery cover for Nerf Terrascout
Authorship, licence & source
- Original author
- Honeybear
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1840643
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
This cover is intended as a replacement for the battery compartment of a Nerf Terrascout. The author created it to replace a missing cover, as no other was available. The render allows for the identification of the closing body, its edges, and the fastening elements integrated into the geometry. The download corresponds to the printed part; it does not include the battery, hardware, or the toy shown as context.
Its purpose is to restore the compartment closure, but the model name does not substitute a fit test. Before printing, compare the support and fastening areas with your unit and check that there is no damage to the original housing. No compatible variants or guaranteed tolerances are documented.
As a preparation tip, check the flatness of the cover and the overhangs of the tabs in the slicer. Select an orientation that allows these details to be reproduced and the supports to be removed without damaging them. Check the fit with the equipment turned off and without forcing the closure. The source does not specify material, layer height, infill, or tested mechanical strength; these settings must be verified for your specific printer and use case.
Declared changes from the original
Translated listing. Original source and authorship retained; original images from Printables.