MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
Strong Feet for CR-6 SE or Ender 3
Authorship, licence & source
- Original author
- 3D_HRLV001
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/239402
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Strong Feet for CR-6 se or Ender 3
Purpose
This model provides reinforced legs with extra height for the CR-6 se or Ender 3. The increased elevation is designed to provide enough space for a quiet fan.
Practical Uses
These feet are intended to raise the printer base, potentially allowing for better airflow or clearance for cooling components.
Included Parts
To complete the installation, the following hardware is required:
- 8x M4 T-nuts
- 8x M4x12mm hex screws
Printing Guidance
Recommended print settings are as follows:
- Material: PLA
- Infill: 25%
- Perimeters: 3
- Nozzle Diameter: 0.4mm
- Layer Height: 0.2mm
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.