MESHOPIAModel sheet · for your workshop
RC & Robotics
Spur gear / main gear Mod1 47t for Thunder Tiger Tomahawk or other nitro RC cars
Authorship, licence & source
- Original author
- CyberbullyBOB
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1387352
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
This model is a replacement spur gear / main gear designed for the Thunder Tiger Tomahawk or other nitro RC cars. It was created as a solution for users unable to find replacement parts after gear damage. 1. Purpose: To serve as a replacement main gear for nitro-powered RC vehicles. 2. Practical Uses: Specifically intended for use in Thunder Tiger Tomahawk models or similar RC cars requiring a Mod1 gear. 3. Included Parts: The download includes two files: a standard spur gear (spur_gear.stl) and a 6-hole version (spu_gear_6_hole.stl). According to the author, the gear features 47 teeth, a 5cm diameter, an inner hole of approximately 2.52cm, and 3.3mm diameter screw holes spaced approximately 2.6cm apart. 4. Printing/Assembly Guidance: The author reports printing the part using PLA+ with 70% cubic subdivision infill. The author notes that this configuration has survived off-road use without visible damage.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.