MESHOPIAModel sheet · for your workshop
RC & Robotics
SpeedyBee Mario5 DC 25mm GPS Mount
Authorship, licence & source
- Original author
- Luis Pereira
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1350755
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
SpeedyBee Mario5 DC 25mm GPS Mount
Purpose
This model is designed as a rear end mount specifically for the SpeedyBee Mario5 DC. It serves as a structural component to hold various electronic connections and modules in place at the rear of the frame.
Practical Uses
This mount provides dedicated support for an XT60 plug, dual SMA connectors intended for the O4 pro, and a 25mm x 25mm GPS unit.
Included Parts
- MARIO5-TPU-XT60_DJI_2_GPS.stl
Printing and Assembly Guidance
The author recommends printing this model in TPU. When printing, use supports; the author notes that the supports should come off easily.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.