Model information
Description
This bracket fits into the stock electronics box for the CR-10 V2/V3 to allow the installation of a BigTreeTech SKR 2 mainboard. The author suggests securing the bracket onto the stock mainboard standoffs with double-sided tape and attaching the SKR 2 board using the stock M3 button-head screws.
Print Settings:
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 35%
Filament: The author lists Generic PLA, ABS, PETG in any color.
Original text by the author on Printables
<p>This bracket will fit into the stock electronics box for the CR-10 V2/V3 where you can install a BigTreeTech SKR 2 mainboard. Secure the bracket onto the stock mainboard standoffs with a bit of double-sided tape and attach the SKR 2 board with the stock M3 button-head screws.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><strong>Resolution:</strong></p>
<p>0.2mm</p>
<p class="detail-setting infill"><strong>Infill: </strong>
<div><p>35</p></div>
<p><strong>Filament:</strong>
Generic PLA, ABS, PETG
Any color</p>
</p></p></p>
Category: 3D Printer Parts
There are no comments yet. Verified ratings and makes appear separately below.