Sport RC Airframe — Assembled Display & Complete Source Collection

OVERVIEW
A complete digital source collection for a sport-style RC aircraft, accompanied by a carefully assembled gearless display airframe and a proposed ivory, deep-red and smoked-navy finish. The illustrated airframe contains 25 original components, including the three-part canopy, wing panels, static control surfaces, ventilation inserts, upper printed hinge and aerodynamic rudder balance. The large upper balance uses the supplied rectangular tongue-and-socket interface; it has not been replaced with a generic linkage horn.

WHAT YOU RECEIVE
The source archive retains all 154 unique supplied resources from 342 catalogued entries: 55 STL meshes, 57 historical G-code files, 40 original reference photographs, one six-page author manual and one shell-folder INI. Exact duplicate entries are not counted as additional designs. A separate painted Blender native contains all 55 original mesh resources: 25 assembled components and 30 preserved optional alternatives, hidden in their original printing poses. A full coloured 3MF retains every one of the assembled model's 877,584 original triangles. The separately identified browser preview is reduced for interactive viewing; it is not the manufacturing master.

GEOMETRY, SIZE AND SCALE
Original STL facet geometry, stored normals and attributes have been retained, and all native mesh vertices, triangle order and component poses were independently reopened and checked. Filenames and native object nodes use opaque identifiers; the included inventory explains useful technical roles. The assembled representation measures approximately 804.8 mm long, 986.6 mm across the wings and 245.6 mm high. These are measurements of the actual supplied geometry in its digital assembly. The author's nominal scale is 1:8; full-size prototype dimensions have not been independently calibrated. For a static display, multiply all dimensions by your target wingspan divided by 986.619 mm. A 500 mm span is about 50.678%; a 250 mm span is about 25.339%. Rescaling changes wall thickness, holes and clearances and does not validate an RC installation.

ASSEMBLY AND HARDWARE SCOPE
The visible model uses genuine supplied gearless shell alternatives. Purchased wheels, motor, propeller, shaft, electronics, wire, linkage hardware and hinge sheet have not been invented or added. All supplied printed landing-gear and propulsion alternatives remain in the source collection and hidden native collection. The retained manual does not define a measured axial motor/mount/spinner stack for these mesh versions, so those optional propulsion pieces are not presented as an installed system. This is an assembled display airframe, not a ready-to-fly hardware installation.

Untested. Original thin-wall meshes and historical machine commands preserved; G-code has not been executed. Inspect units, walls, support access and clearances in your own slicer. Original 0.054 mm canopy seam projection retained. No physical fit, strength, mechanism or flight certification.

Prepared for display and download. No physical print has been certified.