Información del modelo
Descripción
Seat Alhambra / VW Sharan Rear AC Knob
Purpose
This model serves as a simple replacement for a lost rear air conditioning control knob. The design modifies the original mechanism by replacing the click tabs with an entire inner cylinder and omitting the silver decorative circle.
Practical Uses
It is intended for use in Seat Alhambra or VW Sharan vehicles to restore functionality to the rear climate control system.
Included Parts
- alhambraKnob.stl
- alhambraKnob-FitTest_0.25mm_PLA_MINI_12m.gcode
- alhambraKnob_0.15mm_ASA_MINI_36m.gcode
Printing and Assembly Guidance
The author recommends printing with ASA due to high summer temperatures inside vehicles. The provided ASA profile is configured for a MINI printer at a 0.15mm layer height. For installation, the author noted a slight clearance during fitment; they suggest filling this gap with thin double-sided tape rather than using instant glue.
Texto original del autor en Printables
<p>Jednoduchá náhrada za ztracený knoflík ovládání zadní klimatizace. Originální zacvakávací zobáčky jsem nahradil celým vnitřním válcem. Stříbrný ozdobný kroužek jsem vynechal.</p><p>Drobnou vůli při instalaci následně vyplnila tenká oboustranná páska místo původní myšlenky pevného vlepení s kapkou vteřinového lepidla.</p><p>Tiskl jsem na MINI z ASA kvůli teplotám v létě uvnitř auta, 0.15mm.</p><p> </p><p>---</p><p>A simple replacement for the lost rear air conditioning control knob. I replaced the original click beaks with the entire inner cylinder. I omitted the silver decorative circle.</p><p>The slight clearance during installation was subsequently filled with thin double-sided tape instead of the initial idea of gluing it in with a dab of instant glue.</p><p>Printed on the MINI from ASA because of the summer temperatures inside the car, 0.15mm.</p><p> </p>
Preguntas y aportaciones