Model information
Description
A simple replacement for the lost rear air conditioning control knob. The author replaced the original click beaks with the entire inner cylinder and omitted the silver decorative circle. The author reports that a slight clearance during installation was filled with thin double-sided tape instead of using instant glue. The author printed this using ASA on a MINI at 0.15mm layer height due to summer temperatures inside the car.
Files:
alhambraKnob.stl
alhambraKnob-FitTest_0.25mm_PLA_MINI_12m.gcode
alhambraKnob_0.15mm_ASA_MINI_36m.gcode
Original text by the author on Printables
<p>Jednoduchá náhrada za ztracený knoflík ovládání zadní klimatizace. Originální zacvakávací zobáčky jsem nahradil celým vnitřním válcem. Stříbrný ozdobný kroužek jsem vynechal.</p><p>Drobnou vůli při instalaci následně vyplnila tenká oboustranná páska místo původní myšlenky pevného vlepení s kapkou vteřinového lepidla.</p><p>Tiskl jsem na MINI z ASA kvůli teplotám v létě uvnitř auta, 0.15mm.</p><p> </p><p>---</p><p>A simple replacement for the lost rear air conditioning control knob. I replaced the original click beaks with the entire inner cylinder. I omitted the silver decorative circle.</p><p>The slight clearance during installation was subsequently filled with thin double-sided tape instead of the initial idea of gluing it in with a dab of instant glue.</p><p>Printed on the MINI from ASA because of the summer temperatures inside the car, 0.15mm.</p><p> </p>
There are no comments yet. Verified ratings and makes appear separately below.