Información del modelo
Descripción
scx24 flex plates
Purpose
These flex plates are designed to lower the SCX24 chassis closer to the ground. By reducing the height, the model improves the vehicle's center of gravity, which helps prevent rollovers while crawling or navigating steep obstacles.
Practical Uses
While demonstrated on a C10 model, these plates are compatible with any SCX24 model. They are intended to add flex to the chassis to enhance crawling performance.
Included Parts
- scx24 flex plates.v1.stl
Printing and Assembly Guidance
The designer suggests increasing the thickness of the parts within your slicer settings to achieve better performance. On a K1 printer, the print time is approximately one minute, allowing for quick installation and immediate use.
Texto original del autor en Printables
<p>this model will lower your scx24 lower to the ground and improve the center of gravity causing less rollovers when crawling and climbing steep obstacles. i suggest you make them a little bit thicker in your slicer for better performance, they take about 1 minute on my k1 so they are very easy to install and use right away. these can be used on any scx245 model not just the c10 that i am using. </p>
Preguntas y aportaciones