Model information
Description
A Rocket League trophy designed to be printed in pieces on a standard i3 build plate (250x220x210). The pieces are designed to be easy to glue together. The model includes a nameplate where text can be added; the author notes that text should be on the wider side of the nameplate (facing down in the multi-material .3mf). The author provides a single-color version and a multi-color version for use with an MMU3. The author reports a model tolerance of 0.15mm. The author states that supports should be used on the Rocket League logo, but every other piece should be fine without supports. This model is modeled from scratch and is inspired by a trophy found on Thingiverse.
Original text by the author on Printables
<p>This trophy is meant to be printed in pieces on a standard i3 build plate (250x220x210). It pieces together and is designed to be easy to glue together. There is a nameplate where you can add text. Before I had an MMU, I just did a layer based color change for the nameplate. Now I have an MMU3, so I also have a version with multi-color support using multiple parts. The tolerance of the model is 0.15mm although I was still learning how to use parameters when I designed this, so it may not be perfect.</p><p>If you have a decently tuned printer this should be easy to print. The only important thing is to use supports on the Rocket League logo. Every other piece should be fine without any supports! Make sure to add text to the nameplate! The text should be on the wider side of the nameplate (facing down in the multi-material .3mf)<br><br>This model is inspired by a trophy I found ~3 years ago on Thingiverse, but it is modeled from scratch. I looked for it and could not find it anymore. I modeled this around the same time I found that model, so I have no memory of where to find it.</p>
There are no comments yet. Verified ratings and makes appear separately below.