MESHOPIAModel sheet · for your workshop
RC & Robotics
Rims for Robak or HSP88005
Authorship, licence & source
- Original author
- G_rex_B
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 4 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/832940
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Rims for Robak or HSP88005
Purpose
This model provides four different rim designs intended for use with the Robak or HSP88005. The author notes that while the rims have been printed, they have not been fully tested.
Practical Uses
These rims are designed for RC car applications. The author suggests that while they were printed using PETG, a hard TPU material will likely provide longer durability.
Included Parts
- Rim_V1.stl
- Rim_V2.stl
- Rim_V3.stl
- Rim_V4.stl
Printing and Assembly Guidance
To prevent supports from entering the hex socket, the middle hole is covered with a 0.2mm layer during printing. After printing, use a knife to cut the hole open.
Recommended print settings include:
- Orientation: Lay flat on the bed with the outer design facing up.
- Layer Height: 0.2mm
- Walls: 5
- Infill: 40%
- Supports: On (Caution: Do not allow supports to cover the inside of the hex socket).
Attribution: Source provided by author.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.