MESHOPIAModel sheet · for your workshop
RC & Robotics
Replacement Gear Wheel for Carrera RC Peugeot 08 DKR 16 - Red Bull (Reference: 370162106)
Authorship, licence & source
- Original author
- MICK
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1435490
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
- Part type
- Wheels / Tires / Tracks
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Replacement Gear Wheel for Carrera RC Peugeot 08 DKR 16 - Red Bull (Reference: 370162106)
Purpose
This model serves as a replacement part for the middle gear in the Carrera RC Peugeot 08 DKR 16 - Red Bull (Reference: 370162106). It is intended to address issues where the original middle gear loses a tooth.
Practical Uses
This part is used to repair the internal gear mechanism of the specified Carrera RC vehicle when the original component fails.
Included Parts
- Cogwheel Carrera RC Peugeot Rally.stl
Printing and Assembly Guidance
The author recommends using Nylon for printing, although they successfully used PLA. While the center hole is designed to be 2.6mm, it is recommended to drill through the hole with a 2.5mm or 2.6mm drill after printing to ensure proper fit.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.