Model information
Description
Replacement anti tip bars for BSD Racing RC Dirt Bike
Purpose
These bars are designed to replace the original flexible plastic tubes that come with the bike, which tend to wear out quickly. The intended purpose of this design is to assist in keeping the dirt bike upright while learning to operate it. Note that this item is not meant to protect the dirt bike.
Practical Uses
This model is suitable for users learning to operate the BSD Racing RC Dirt Bike. The longevity of the parts depends on how rough the bike is operated.
Included Parts
This listing includes the anti tip bars (anti tip bars.stl). To complete the assembly, you will need 4 MR128K bearings and a small amount of lubricant for the pins and bearing holes.
Printing and Assembly Guidance
Material selection depends on how rough the bike is run; the designer recommends printing the parts out of ABS or PETG. Assembly requires the installation of 4 MR128K bearings. This model fits BSD Racing RC Dirt Bike models BS403T and BS404T.
Original text by the author on Printables
<p>The original bars that come with the bike are just flexible plastic tubes. They wear out very quickly. Especially if you're just learning to operate the dirt bike. My design should last a very long time. Depending on how rough you run the bike will dictate what material to print the parts out of. I recommend ABS or PETG. “I AM IN NO WAY RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR DIRT BIKE AFTER YOU INSTALL THIS ITEM!” It is in no way meant to protect the dirt bike! It's intended purpose is to assist in keeping the dirt bike upright while learning to operate the dirt bike. </p>
Questions and contributions