MESHOPIAModel sheet · for your workshop
Portable Devices
(Remix) Yaesu FT-891 Radio and Yaesu FC-50 Tuner Armor / Rails for small printers
Authorship, licence & source
- Original author
- Notepid
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 4 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1230648
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
This model is a remix of armor rails designed for the Yaesu FT-891 radio and the Yaesu FC-50 tuner. The original design has been split into smaller components specifically to accommodate users with smaller print beds, such as an Ender 3 V2.
Purpose and Practical Uses
The purpose of these rails is to provide armor/rail protection for the Yaesu FT-891 radio and the FC-50 tuner. By splitting the parts, the model allows for the printing of larger accessories on standard-sized hobbyist printers.
Included Parts
The files included in this set are:
- FT_891 Tuner Armor Rail 1.stl
- FT_891 Tuner Armor Rail 2.stl
- FT_891 Radio Armor Rail 1.stl
- FT_891 Radio Armor Rail 2.stl
Printing and Assembly Guidance
For printing, the radio rail requires supports due to the bend in the handle. The other parts should print without supports, provided the files are oriented with the recess facing upwards. If you need to print parts for the opposite side, you must mirror the files in your slicer software. Regarding assembly, if you are not using the screws provided with the FC-50 kit, be sure to note the maximum screw length required.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.