MESHOPIAModel sheet · for your workshop
RC & Robotics
Rear Leafspring Conversion for Element RC Knightrunner
Authorship, licence & source
- Original author
- koofer1269
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 8 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1518695
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Rear Leafspring Conversion for Element RC Knightrunner
Purpose
This kit is designed to convert the rear of the vehicle to a leaf spring setup. The author modeled the design after a real Toyota Tacoma, noting that Independent Front Suspension (IFS) systems do not utilize leaf springs.
Practical Uses
This kit is intended for the rear section only. It is designed to work in conjunction with the FMS rear leaf spring kit.
Included Parts
- front spring holder - FR holder.stl
- rear spring holder - RR holder.stl
- axle adapter - FR adapter.stl
- axle adapter - RR adapter.stl
- front spring holder - FL holder.stl
- rear spring holder - RL holder.stl
- axle adapter - FL adapter.stl
- axle adapter - RL adapter.stl
Assembly Guidance
Installation requires the FMS rear leaf spring kit and four M2.5 nuts. Alternatively, the author notes that M2 hardware can be used for the holders and mounts instead of M2.5 nuts. If the original source link is unavailable, the author suggests searching for "1/10 Atlas Rear Leaf Springs."
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.