MESHOPIAModel sheet · for your workshop
Home Medical Tools
RC3 Stack - High Speed Print
Authorship, licence & source
- Original author
- Mike
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/30194
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose: This is a high-speed version of the RC3 Stack designed for rapid printing with minimal acceleration and deceleration to reduce shaking. 1. Each shield is 20mm high with a 0.25mm gap. The second shield begins at 20.25mm and the third at 40.50mm. Two units can be stacked by placing the second copy at Z 81.00mm.
Practical Uses: Designed for applications requiring high-speed printing and strong bonding between perimeter shells.
Included Parts:
- convid-mike-v2-4-stack-full.stl
Printing/Assembly Guidance: For a 0.4mm nozzle, use a 0.25mm layer height and 0.6mm layer width. The model must be printed with 2 outline perimeter shells, 0 top solid layers, 0 bottom solid layers, and 0 infill to hollow out the object and determine wall thickness. Use a brim with a 0.02mm gap and 6 outlines. No supports are required. The author suggests printing as fast as the printer allows and used an extrusion multiplier of 1.10 to improve bonding between layers and shells. In Simplify3D, the author used multiple processes to print the first two layers at a slower speed.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.