Model information
Description
This model consists of four stacked components.
Practical uses are not specified in the provided source text.
Included files
- rc3-headband-3-hole-punch-4x-stacked.stl
Printing guidance:
The author recommends checking your settings before printing. The author used a 2.0 mm layer height and 5% infill. For supports, the author used 10% infill, noting that removing the layers between the bands can be difficult.
Original text by the author on Printables
<p>4 stacked</p>
<h3>Print instructions</h3><p>!!make sure you check your setting!!<br/>
I printed at 2.0 layer height<br/>
and 5 % infill.<br/>
10 % infill on the supports: a little tough to remove the layers in between the bands</p>
Questions and contributions