Información del modelo
Descripción
RC truggy RIM
Purpose
This model is a replacement rim designed specifically for the truggy designed by dukedoks. It was created to provide a compatible rim option for wheels that originally lacked one.
Practical Uses
This part is intended for use on a 1:10 scale RC truggy to allow for the mounting of tires.
Included Parts
- rim.stl
Dimensions
- Width: 50mm
- Total diameter: 79mm
- Tyre bead diameter: 73.5mm
- Hub offset: 25.6mm
- Hexagon: 12mm
Printing and Assembly Guidance
Print the model from the bottom side. Supports are required to hold the central cylinder during the printing process.
Texto original del autor en Printables
<p>I bought some wheels for the <a href="https://dukedoks.com/portfolio/guia-cramer/">truggy designed by dukedoks</a> and they have no rim. <br>As I have not found any compatible for them, I have designed this one.</p><p>Dimensions (see the sketch):<br>Width: 50mm<br>Total diameter: 79mm<br>Tyre bead diameter: 73,5mm<br>Hub offset: 25,6mm<br>Hexagon: 12 mm</p><p>Printed from the bottom side with supports to hold the central cylinder.</p>
Preguntas y aportaciones