MESHOPIAModel sheet · for your workshop
RC & Robotics
RC Plane Tail Steering Wheel Remix
Authorship, licence & source
- Original author
- mrmatthorner
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 7 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/235636
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Aircraft, Helicopters & Drones
- Project type
- Functional RC
- Part type
- Wheels / Tires / Tracks, Axles / Suspension / Steering
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
RC Plane Tail Steering Wheel
Purpose
This model is a remix of Jkilby's tail wheel and Qrome's 54mm wheel and tire. It is designed to provide a tail steering solution for RC planes, featuring a taller wishbone to accommodate larger wheels and threaded posts to prevent components from detaching during use.
Practical Uses
It serves as landing gear for RC aircraft, specifically functioning as a steerable tail wheel assembly. The design ensures the wishbone and rudder move in unison while allowing the fuselage plate to rotate freely.
Included Parts
- Wishbone
- Wheel
- Tire
- Rudder Guide
- Fuselage Plate
- Rudder Plate
- Nut
Printing and Assembly Guidance
The author suggests printing the wheel from PETG and the tire from TPU.
To assemble the wheel, insert it between the wishbone and slide a screw through to act as an axle. Tighten until excessive play is removed, ensuring the wheel can still rotate freely. A second, slightly smaller nylon nut can be used to prevent the first nut from backing off.
For the fuselage plate, slide its hole onto the wishbone post; the bottom of the post is smooth to allow the plate to rotate freely. Secure loosely with a nut. Slide the rudder plate onto the rudder guide's threaded post and secure tightly with a nut so it does not spin. Slide the other hole of the rudder plate onto the fuselage nut and secure tightly with a nut to fix the rudder plate to the wishbone.
Finally, glue the fuselage plate to the bottom of the fuselage and the rudder guide to the rudder, ensuring the wishbone post is centered directly under the rudder's axis of rotation.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.