Información del modelo
Descripción
Purpose
These skis are designed for small planes to allow for flying in snowy conditions. The design can be scaled up to fit larger airplane sizes.
Practical Uses
They are used to equip model airplanes for operation in snow. The author notes they add a small amount of weight to the front of the plane.
Included Parts
- Plane Ski (right).stl
- Plane Ski (Left).stl
- Plane-Skis-(1)-176.gcode
Printing and Assembly Guidance
Printing is described as quick. If a printer cannot handle a maximum overhang of 45 degrees, additional supports may be required. To secure the skis to a model, the author used paper clips bent into the holes on both sides to hold them steady.
Texto original del autor en Printables
<p>This was a very fun thing to make and I really haven't seen many around, I hope that this can help people to still enjoy there hobbies like flying airplanes in snowy conditions, as far as printing goes, it was a nice and quick, if your printer cant do a max overhang of 45 it might need more supports, which is understandable for larger scale airplanes. It does add a little weight to the front of the plane but shouldn't affect flying too much. I secured them to my model by using paper clips and bending them into the holes on both sides to hold it steady. God Luck and Thank you!</p>
Preguntas y aportaciones