Model information
Description
Fuel Station V2 based on the Evojet RFP600 pump. The author designed this station specifically around the mentioned pump to prevent leaking or slow fuel stops.
Practical Uses
This model is intended for use as an RC Jet Fuel Station/Tank Station.
Included Parts
The model files include the Deckel, GehäuseV2, Holder, and Holder Fuel Filter. Required hardware and electronic components not included in the print files are M3 inserts, an XT60E-M connector, and a 3-position switch.
Printing and Assembly Guidance
The author recommends printing components in ASA CF, though PETG is noted as a compatible alternative. The main body requires supports during the printing process. The holder should be printed using 3 outlines and approximately 35% infill.
Original text by the author on Printables
<p>Fuel Station V2 based on the Evojet<strong> RFP600 </strong>pump.</p><p>I have tried several pumps over the years and just take my word for it and save yourself from leaking pumps or painstakingly slow fuel stops and spend the money on the mentioned pump.</p><p>I designed my fuel station around it.</p><p> </p><p>I printed everything in ASA CF but PETG will also work. you will need some supports within the main body. the holder needs to be printed with 3 outlines and around 35% infill.</p><p> </p><p>you will need m3 inserts , an XT60E-M connector and a 3 position switch.</p>
Questions and contributions